vs.

      Case IH Axial-Flow 2588 vs. Salford CS6050

      6 reasons to buy Case IH Axial-Flow 2588:

      Purifying system

      Total purification area 5.1 m2 and 4.3 m2 16 % more or 0.8 m2

      Operation

      Fuel Capacity 681.4 l. and 450 l. 34 % more or 231.4 l.

      Motor

      Power 227.4 kW and 179.7 kW 21 % more or 47.7 kW
      Forced pressurization power 242.4 kW and 180.5 kW 26 % more or 61.9 kW

      Grain reception and processing

      Grain tank volume 10219.3 l. and 7000 l. 32 % more or 3219.3 l.
      Unloading rate 84.6 l/sec and 72 l/sec 15 % more or 12.6 l/sec

      2 reasons to buy Salford CS6050:

      Threshing device

      Rotor high speed 1140 rev / min and 1125 rev / min 1 % more or 15 rev

      Operation

      Operational weight without attachment 10820 kg and 13607.8 kg 20 % less or 2787.8 kg

      Neutral reasons:

      Threshing device

      Rotor diameter 762 mm and 607 mm
      Low rotor speed 450 rev / min and 440 rev / min

      Sizes

      Height to cab upper part 3932 mm and 3950 mm
      Between tyres width 3353 mm and 3180 mm

      Purifying system

      Self-alignment No and 25%

      Operation

      Transmission type Hydro-Static Transmission and hydrostatic
      Gears number 3 and 3

      Motor

      Manufacturer Case IH and New Holland

      Images

      Sizes

      2. Between tyres width 3353 mm 2. Between tyres width 3180 mm
      3. Height to cab upper part 3932 mm 3. Height to cab upper part 3950 mm