- Home/
- Comparison/
- Combine Harvester/
- New Holland CX860 vs. Salford TC5060
New Holland CX860 vs. Salford TC5060
7 reasons to buy New Holland CX860:
Purifying system
Total purification area | 6.5 m2 and 4.1 m2 | 37 % more or 2.4 m2 |
Low cleaning fan speed | 475 rev / min and 350 rev / min | 26 % more or 125 rev |
Operation
Fuel Capacity | 749.5 l. and 300 l. | 60 % more or 449.5 l. |
Motor
Power | 246.1 kW and 126.8 kW | 48 % more or 119.3 kW |
Displacement | 7.8 l. and 6.8 l. | 13 % more or 1.0 l. |
Grain reception and processing
Unloading rate | 105.7 l/sec and 60 l/sec | 43 % more or 45.7 l/sec |
Grain tank volume | 11628.9 l. and 5200 l. | 55 % more or 6428.9 l. |
3 reasons to buy Salford TC5060:
Threshing device
Rotor high speed | 1070 rev / min and 905 rev / min | 15 % more or 165 rev |
Purifying system
High cleaning fan speed | 1000 rev / min and 900 rev / min | 10 % more or 100 rev |
Operation
Operational weight without attachment | 8520 kg and 15499.7 kg | 45 % less or 6979.7 kg |
Neutral reasons:
Threshing device
Rotor diameter | 750 mm and 607 mm |
Rotor length | 1574.8 mm and 1300 mm |
Low rotor speed | 305 rev / min and 430 rev / min |
Concave zone | 1.2 m2 and 0.79 m2 |
Sizes
Dimensional length | 9052.6 mm and 8135 mm |
Between tyres width | 4337.3 mm and 3173 mm |
Separation/division
Separator length | 3670.3 mm and 605 mm |
Separation zone | 7.2 m2 and 4.4 m2 |
Purifying system
Self-alignment | there is and 23% |
Operation
Transmission type | Hydrostatic drive, 4-speed gearbox and mechanical transmission |
Gears number | 4 and 4 |
Motor
Manufacturer | New Holland and New Holland |
Power measured at | 2100 rev / min and 2100 rev / min |
Images
Sizes
1. Dimensional length | 9052.6 mm | 1. Dimensional length | 8135 mm |
2. Between tyres width | 4337.3 mm | 2. Between tyres width | 3173 mm |