- Home/
- Comparison/
- Tractor with Mechanical Front-Wheel Drive/
- John Deere 76F Open Position vs. John Deere 7730 152 Power Take Horsepower
John Deere 76F Open Position vs. John Deere 7730 152 Power Take Horsepower
2 reasons to buy John Deere 76F Open Position:
Operation
Turn radius | 3300 mm and 5105.4 mm | 35 % less or 1805.4 mm |
Motor
Power measured at | 2600 rev / min and 2100 rev / min | 19 % more or 500 rev |
9 reasons to buy John Deere 7730 152 Power Take Horsepower:
Operation
Fuel Capacity | 390 l. and 50 l. | 87 % more or 340 l. |
Three-point hitch load-carrying capacity at 24 inches | 4983 kg and 2300 kg | 54 % more or 2683 kg |
Motor
Cylinders number | 6 and 4 | 33 % more or 2 |
Displacement | 6.8 l. and 2.7 l. | 60 % more or 4.1 l. |
Full power | 141.7 kW and 56.7 kW | 60 % more or 85.0 kW |
Maximum torque | 764.7 Nm and 260.3 Nm | 66 % more or 504.4 Nm |
Torque measured at | 1600 rev / min and 1400 rev / min | 12 % more or 200 rev |
Hydraulic system
Pump bandwidth | 121.1 l/min and 35 l/min | 71 % more or 86.1 l/min |
Remote control valves number | 2 and 1 | 50 % more or 1 |
Neutral reasons:
Sizes
Wheelbase | 1854 mm and 2860 mm |
Operation
Rear tyres size 2wd/4wd | 380/70x24 and 480/80R42 (R1) |
Motor
Aspiration | turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow |
Manufacturer | VM and John Deere |
Power take mechanism power | 49.2 kW and 114.3 kW |
Hydraulic system
Overflow valve pressure | 19498.4 kPa and 20091.3 kPa |
Gear box
Transmission type | 8+8/16+8 synchronized reversing gear and PowrQuad Plus |
Images
Sizes
4. Wheelbase | 1854 mm | 4. Wheelbase | 2860 mm |