- Home/
- Comparison/
- Tractor with Mechanical Front-Wheel Drive/
- John Deere 8130 180 Power Take Horsepower vs. John Deere 85F Open Position
John Deere 8130 180 Power Take Horsepower vs. John Deere 85F Open Position
9 reasons to buy John Deere 8130 180 Power Take Horsepower:
Operation
Three-point hitch load-carrying capacity at 24 inches | 5625 kg and 2500 kg | 56 % more or 3125 kg |
Fuel Capacity | 681 l. and 60 l. | 91 % more or 621 l. |
Motor
Cylinders number | 6 and 4 | 33 % more or 2 |
Displacement | 9 l. and 2.7 l. | 70 % more or 6.3 l. |
Full power | 167.8 kW and 61.6 kW | 63 % more or 106.2 kW |
Maximum torque | 913.8 Nm and 288.8 Nm | 68 % more or 625.0 Nm |
Torque measured at | 1600 rev / min and 1400 rev / min | 12 % more or 200 rev |
Hydraulic system
Pump bandwidth | 166.6 l/min and 35 l/min | 79 % more or 131.6 l/min |
Remote control valves number | 3 and 1 | 67 % more or 2 |
1 reasons to buy John Deere 85F Open Position:
Motor
Power measured at | 2600 rev / min and 2100 rev / min | 19 % more or 500 rev |
Neutral reasons:
Sizes
Wheelbase | 3050 mm and 1956 mm |
Operation
Front tyres size 2wd / 4wd | Group 42 and 240/70x16 |
Rear tyres size 2wd/4wd | Group 47 and 380/70x20 |
Motor
Aspiration | Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging |
Manufacturer | John Deere and VM |
Power take mechanism power | 135.9 kW and 54.4 kW |
Hydraulic system
Overflow valve pressure | 20615.3 kPa and 19498.4 kPa |
Gear box
Transmission type | powershift transmission and 8+8/16+8 synchronized reversing gear |
Images
Sizes
4. Wheelbase | 3050 mm | 4. Wheelbase | 1956 mm |