- Home/
- Comparison/
- General-Purpose Tractor/
- John Deere 4320 vs. New Holland TN60DA
John Deere 4320 vs. New Holland TN60DA
5 reasons to buy John Deere 4320:
Operation
Turn radius | 2800 mm and 3628 mm | 23 % less or 828 mm |
Motor
Torque measured at | 2400 rev / min and 1400 rev / min | 42 % more or 1000 rev |
Cylinders number | 4 and 3 | 25 % more or 1 |
Power measured at | 2400 rev / min and 2300 rev / min | 4 % more or 100 rev |
Hydraulic system
Pump bandwidth | 64.6 l/min and 48.5 l/min | 25 % more or 16.1 l/min |
6 reasons to buy New Holland TN60DA:
Operation
Fuel Capacity | 74 l. and 54.9 l. | 26 % more or 19.1 l. |
Generator current strength | 85 amperes and 75 amperes | 12 % more or 10 amperes |
Three-point hitch load-carrying capacity at 24 inches | 1800 kg and 1134 kg | 37 % more or 666 kg |
Motor
Displacement | 2.9 l. and 2.4 l. | 17 % more or 0.5 l. |
Full power | 42.5 kW and 35.8 kW | 16 % more or 6.7 kW |
Maximum torque | 216 Nm and 138.3 Nm | 36 % more or 77.7 Nm |
Neutral reasons:
Sizes
Wheelbase | 1816 mm and 2131 mm |
Operation
Front tyres size 2wd / 4wd | 8.00-16 R1 and 9.5x15 |
Rear tyres size 2wd/4wd | 13.6-28 R1 and 14.9x28 |
Operating voltage | 12 V and 12 V |
Motor
Aspiration | turbocharging and natural aspiration |
Power take mechanism power | 30.2 kW and 33.6 kW |
Hydraulic system
Overflow valve pressure | 17236.9 kPa and 18995 kPa |
Gear box
Transmission type | Power Revers and 8x8 full mesh transmission with synchronized mechanical drive |
Images
Sizes
4. Wheelbase | 1816 mm | 4. Wheelbase | 2131 mm |