- Home/
- Comparison/
- General-Purpose Tractor/
- John Deere 790 vs. New Holland TN60A
John Deere 790 vs. New Holland TN60A
3 reasons to buy John Deere 790:
Operation
Turn radius | 2100 mm and 3628 mm | 42 % less or 1528 mm |
Motor
Power measured at | 2700 rev / min and 2300 rev / min | 15 % more or 400 rev |
Torque measured at | 2700 rev / min and 1400 rev / min | 48 % more or 1300 rev |
7 reasons to buy New Holland TN60A:
Operation
Three-point hitch load-carrying capacity at 24 inches | 1800 kg and 370 kg | 79 % more or 1430 kg |
Fuel Capacity | 87.1 l. and 23.9 l. | 73 % more or 63.2 l. |
Generator current strength | 85 amperes and 20 amperes | 76 % more or 65 amperes |
Motor
Maximum torque | 215.6 Nm and 73.3 Nm | 66 % more or 142.3 Nm |
Displacement | 2.9 l. and 1.3 l. | 55 % more or 1.6 l. |
Full power | 42.5 kW and 20.1 kW | 53 % more or 22.4 kW |
Hydraulic system
Pump bandwidth | 48.5 l/min and 36.4 l/min | 25 % more or 12.1 l/min |
Neutral reasons:
Sizes
Wheelbase | 1550 mm and 2070 mm |
Operation
Front tyres size 2wd / 4wd | 5.00-15 6PR and 9.5x15 |
Rear tyres size 2wd/4wd | 11.2-24 4PR and 14.9x28 |
Operating voltage | 12 V and 12 V |
Motor
Cylinders number | 3 and 3 |
Aspiration | natural aspiration and natural aspiration |
Power take mechanism power | 17.9 kW and 33.6 kW |
Hydraulic system
Overflow valve pressure | 14134.2 kPa and 18995 kPa |
Gear box
Transmission type | sliding gear and 8x8 full mesh transmission with synchronized mechanical drive |
Images
Sizes
4. Wheelbase | 1550 mm | 4. Wheelbase | 2070 mm |