vs.

      Case 335B vs. Terex 4066C

      9 reasons to buy Case 335B:

      Sizes

      Unloading ground clearance 940 mm and 730 mm 22 % more or 210 mm

      Operation

      Fuel Capacity 440 l. and 424 l. 4 % more or 16 l.
      Hydraulic system fluid volume 300 l. and 170.3 l. 43 % more or 129.7 l.
      Generator current strength 90 amperes and 70 amperes 22 % more or 20 amperes

      Motor

      Displacement 12.9 l. and 12.7 l. 2 % more or 0.2 l.
      Full power 306 kW and 298.3 kW 3 % more or 7.7 kW
      Effective power 284 kW and 279.6 kW 2 % more or 4.4 kW

      Gear box

      Maximum speed 48 km/h and 45.1 km/h 6 % more or 2.9 km/h

      Dump

      Lifting time 11 sec and 16 sec 31 % less or 5 sec

      8 reasons to buy Terex 4066C:

      Sizes

      Clearance 580 mm and 540 mm 7 % more or 40 mm

      Operation

      Engine oil volume 36 l. and 35 l. 3 % more or 1 l.
      Transmission fluid volume 41.6 l. and 35.5 l. 15 % more or 6.1 l.

      Motor

      Torque measured at 1200 rev / min and 1000 rev / min 17 % more or 200 rev
      Maximum torque 1965.9 Nm and 1850 Nm 6 % more or 115.9 Nm

      Dump

      Lowering time 12 sec and 13 sec 8 % less or 1 sec
      Brimmed volume 17 m3 and 15 m3 12 % more or 2 m3
      Volume with top 22 m3 and 20 m3 9 % more or 2 m3

      Neutral reasons:

      Weight

      Front axle unloaded 14100 kg and 14217.9 kg
      Unloaded rear axle 7200 kg and 7652.1 kg
      Full empty 28500 kg and 29490.3 kg
      Maximum loading 60000 kg and 65990.9 kg

      Sizes

      Dimensional length 10780 mm and 10650 mm
      Overall width 3190 mm and 3430 mm
      Headroom 3680 mm and 3660 mm
      Wheelbase 6270 mm and 5585 mm
      Unloading height 6870 mm and 6540 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size tubeless tires 26.5 R25 and 26.5 R 25

      Motor

      Manufacturer Case and Detroit diesel
      Model Family IV 13 l III Level III certified and lot 60
      Power measured at 2100 rev / min and 2100 rev / min
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharger with charge air cooler by oncoming air flow, water cooling
      Cylinders number 6 and 6

      Gear box

      Transmission type powershift and ZF 6WG 65 Automatic gearbox with change to manual mode
      Forward gears number 6 and 6
      Reverse gears number 3 and 3

      Dump

      Nominal payload 31500 kg and 36500.6 kg
      Discharge angle 68 degrees and 65 degrees

      Images

      Sizes

      1. Dimensional length 10780 mm 1. Dimensional length 10650 mm
      2. Overall width 3190 mm 2. Overall width 3430 mm
      3. Headroom 3680 mm 3. Headroom 3660 mm
      4. Wheelbase 6270 mm 4. Wheelbase 5585 mm
      5. Clearance 540 mm 5. Clearance 580 mm
      6. Unloading height 6870 mm 6. Unloading height 6540 mm
      7. Unloading ground clearance 940 mm 7. Unloading ground clearance 730 mm

      Dump

      8. Discharge angle 68 degrees 8. Discharge angle 65 degrees