vs.

      John Deere 250D vs. Terex TA40

      3 reasons to buy John Deere 250D:

      Motor

      Torque measured at 1400 rev / min and 1350 rev / min 4 % more or 50 rev

      Dump

      Lifting time 11.9 sec and 12.5 sec 5 % less or 0.6 sec
      Lowering time 6 sec and 8 sec 25 % less or 2 sec

      14 reasons to buy Terex TA40:

      Sizes

      Clearance 900 mm and 430 mm 52 % more or 470 mm
      Unloading ground clearance 900 mm and 580 mm 36 % more or 320 mm

      Operation

      Cooling system fluid volume 67 l. and 32.9 l. 51 % more or 34.1 l.
      Engine oil volume 32 l. and 25.5 l. 20 % more or 6.5 l.
      Transmission fluid volume 61 l. and 21.8 l. 64 % more or 39.2 l.
      Generator current strength 100 amperes and 80 amperes 20 % more or 20 amperes
      Fuel Capacity 450 l. and 340 l. 24 % more or 110 l.
      Hydraulic system fluid volume 330 l. and 79 l. 76 % more or 251 l.

      Motor

      Displacement 14 l. and 9 l. 36 % more or 5 l.
      Maximum torque 2098.8 Nm and 1069.7 Nm 49 % more or 1029.1 Nm
      Effective power 325.9 kW and 197.6 kW 39 % more or 128.3 kW

      Gear box

      Maximum speed 60 km/h and 50 km/h 17 % more or 10 km/h

      Dump

      Brimmed volume 17.4 m3 and 10.5 m3 40 % more or 6.9 m3
      Volume with top 23.3 m3 and 13.8 m3 41 % more or 9.5 m3

      Neutral reasons:

      Weight

      Full empty 18300 kg and 30755.4 kg
      Maximum loading 41500 kg and 68755.1 kg
      Front axle unloaded 10140 kg and 15846.7 kg
      Unloaded central axis 4080 kg and 7484.3 kg
      Unloaded rear axle 4070 kg and 7424.4 kg
      Loaded front axle 13160 kg and 18281.6 kg
      Loaded central axis 14240 kg and 24947.6 kg
      Loaded rear axle 14100 kg and 24947.6 kg

      Sizes

      Overall width 2820 mm and 3400 mm
      Headroom 3480 mm and 3900 mm
      Wheelbase 5010 mm and 5300 mm
      Unloading height 6120 mm and 6900 mm
      Dimensional length 9500 mm and 10900 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 23.5R25 and 29.5R25

      Motor

      Cylinders number 6 and 6
      Aspiration Turbocharger with charge air cooler by oncoming air flow and turbocharging
      Manufacturer John Deere and Detroit diesel
      Model 6090 and lot 60
      Power measured at 2000 rev / min and 2000 rev / min

      Gear box

      Transmission type ZF 6 HP592C automatic and Allison 4500 ORS fully automatic transmission with a planetary gearshift mechanism
      Forward gears number 6 and 6
      Reverse gears number 1 and 1

      Dump

      Nominal payload 23200 kg and 37999.7 kg
      Discharge angle 70 degrees and 66 degrees

      Images

      Sizes

      1. Dimensional length 9500 mm 1. Dimensional length 10900 mm
      2. Overall width 2820 mm 2. Overall width 3400 mm
      3. Headroom 3480 mm 3. Headroom 3900 mm
      4. Wheelbase 5010 mm 4. Wheelbase 5300 mm
      5. Clearance 430 mm 5. Clearance 900 mm
      6. Unloading height 6120 mm 6. Unloading height 6900 mm
      7. Unloading ground clearance 580 mm 7. Unloading ground clearance 900 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 66 degrees