- Home/
- Comparison/
- Articulated Hauler/
- John Deere 300C vs. Hitachi AH350D
John Deere 300C vs. Hitachi AH350D
3 reasons to buy John Deere 300C:
Motor
Displacement | 15.1 l. and 12 l. | 21 % more or 3.1 l. |
Gear box
Reverse gears number | 3 and 1 | 67 % more or 2 |
Dump
Lowering time | 7 sec and 8 sec | 12 % less or 1 sec |
11 reasons to buy Hitachi AH350D:
Sizes
Clearance | 523 mm and 511 mm | 2 % more or 12 mm |
Unloading ground clearance | 806 mm and 640 mm | 21 % more or 166 mm |
Operation
Fuel Capacity | 485 l. and 268.8 l. | 45 % more or 216.2 l. |
Generator current strength | 100 amperes and 55 amperes | 45 % more or 45 amperes |
Motor
Maximum torque | 1974 lb / ft and 723 lb / ft | 63 % more or 1251 lb |
Full power | 315 kW and 194.6 kW | 38 % more or 120.4 kW |
Effective power | 308 kW and 187.2 kW | 39 % more or 120.8 kW |
Gear box
Maximum speed | 54 km/h and 46.7 km/h | 14 % more or 7.3 km/h |
Dump
Brimmed volume | 15.2 m3 and 13 m3 | 14 % more or 2.2 m3 |
Volume with top | 20.1 m3 and 16.8 m3 | 16 % more or 3.3 m3 |
Lifting time | 13 sec and 14 sec | 7 % less or 1 sec |
Neutral reasons:
Weight
Maximum loading | 46319.9 kg and 59225.6 kg |
Full empty | 19319.9 kg and 26725.7 kg |
Front axle unloaded | 9139.9 kg and 13500 kg |
Unloaded central axis | 5190 kg and 6568 kg |
Unloaded rear axle | 4990 kg and 6563.5 kg |
Loaded front axle | 14589.8 kg and 18511.1 kg |
Loaded central axis | 15965.1 kg and 20361.8 kg |
Loaded rear axle | 15765.1 kg and 20357.2 kg |
Sizes
Dimensional length | 9213 mm and 10267 mm |
Overall width | 3283 mm and 3215 mm |
Headroom | 3423 mm and 3701 mm |
Wheelbase | 4119 mm and 5446 mm |
Unloading height | 6079 mm and 7164 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 23.5R25 and 26.5R25 Radial digger |
Motor
Model | OM442 and MercedesBenz OM501LA |
Aspiration | natural aspiration and turbocharging and interstage cooler |
Manufacturer | Daimler Chrysler and Daimler Chrysler |
Gear box
Transmission type | ZF 6WG 210 camshaft design with built-in power take-off, gears with full mesh, hydraulic multi-plate clutch, electronic control, hydrodynamic torque converter with a lock, integral PTO drive and Allison HD4500R ORS with integrated retarder |
Forward gears number | 6 and 6 |
Dump
Nominal payload | 26999.6 kg and 32500 kg |
Discharge angle | 65 degrees and 70 degrees |
Images
Sizes
3. Headroom | 3423 mm | 3. Headroom | 3701 mm |
4. Wheelbase | 4119 mm | 4. Wheelbase | 5446 mm |
5. Clearance | 511 mm | 5. Clearance | 523 mm |
6. Unloading height | 6079 mm | 6. Unloading height | 7164 mm |
7. Unloading ground clearance | 640 mm | 7. Unloading ground clearance | 806 mm |
1. Dimensional length | 9213 mm | 1. Dimensional length | 10267 mm |
2. Overall width | 3283 mm | 2. Overall width | 3215 mm |
Dump
8. Discharge angle | 65 degrees | 8. Discharge angle | 70 degrees |