- Home/
- Comparison/
- Articulated Hauler/
- John Deere 300C vs. JCB 714
John Deere 300C vs. JCB 714
11 reasons to buy John Deere 300C:
Sizes
Clearance | 511 mm and 430 mm | 16 % more or 81 mm |
Operation
Fuel Capacity | 268.8 l. and 199.9 l. | 26 % more or 68.9 l. |
Cooling system fluid volume | 37.9 l. and 29.9 l. | 21 % more or 8.0 l. |
Engine oil volume | 30.3 l. and 16.3 l. | 46 % more or 14.0 l. |
Motor
Full power | 194.6 kW and 111.9 kW | 42 % more or 82.7 kW |
Effective power | 187.2 kW and 107 kW | 43 % more or 80.2 kW |
Displacement | 15.1 l. and 5.9 l. | 61 % more or 9.2 l. |
Maximum torque | 980.3 Nm and 630.5 Nm | 36 % more or 349.8 Nm |
Gear box
Maximum speed | 46.7 km/h and 39.9 km/h | 15 % more or 6.8 km/h |
Dump
Lowering time | 7 sec and 10 sec | 30 % less or 3 sec |
Volume with top | 16.8 m3 and 7.3 m3 | 57 % more or 9.5 m3 |
7 reasons to buy JCB 714:
Sizes
Unloading ground clearance | 680 mm and 640 mm | 6 % more or 40 mm |
Operation
Hydraulic system fluid volume | 88 l. and 79.5 l. | 10 % more or 8.5 l. |
Transmission fluid volume | 34.8 l. and 15.9 l. | 54 % more or 18.9 l. |
Generator current strength | 70 amperes and 55 amperes | 21 % more or 15 amperes |
Motor
Power measured at | 2200 rev / min and 2100 rev / min | 5 % more or 100 rev |
Torque measured at | 1500 rev / min and 1300 rev / min | 13 % more or 200 rev |
Dump
Lifting time | 9.7 sec and 14 sec | 31 % less or 4.3 sec |
Neutral reasons:
Weight
Front axle unloaded | 9139.9 kg and 6369.8 kg |
Unloaded rear axle | 4990 kg and 3769.8 kg |
Loaded front axle | 14589.8 kg and 8969.8 kg |
Loaded rear axle | 15765.1 kg and 14170.2 kg |
Full empty | 19319.9 kg and 10140.1 kg |
Maximum loading | 46319.9 kg and 23140 kg |
Sizes
Overall width | 3283 mm and 2500 mm |
Headroom | 3423 mm and 3425 mm |
Dimensional length | 9213 mm and 6784 mm |
Wheelbase | 4119 mm and 3650 mm |
Unloading height | 6079 mm and 3862 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 23.5R25 and Michelin 20.5 R25 |
Motor
Manufacturer | Daimler Chrysler and Cummins |
Aspiration | natural aspiration and Turbocharging with charge air cooler |
Model | OM442 and 6BTAA |
Gear box
Transmission type | ZF 6WG 210 camshaft design with built-in power take-off, gears with full mesh, hydraulic multi-plate clutch, electronic control, hydrodynamic torque converter with a lock, integral PTO drive and plain gear-changing |
Forward gears number | 6 and 6 |
Reverse gears number | 3 and 3 |
Dump
Nominal payload | 26999.6 kg and 13140.1 kg |
Discharge angle | 65 degrees and 84 degrees |
Images
Sizes
5. Clearance | 511 mm | 5. Clearance | 430 mm |
6. Unloading height | 6079 mm | 6. Unloading height | 3862 mm |
7. Unloading ground clearance | 640 mm | 7. Unloading ground clearance | 680 mm |
1. Dimensional length | 9213 mm | 1. Dimensional length | 6784 mm |
2. Overall width | 3283 mm | 2. Overall width | 2500 mm |
3. Headroom | 3423 mm | 3. Headroom | 3425 mm |
4. Wheelbase | 4119 mm | 4. Wheelbase | 3650 mm |
Dump
8. Discharge angle | 65 degrees | 8. Discharge angle | 84 degrees |