vs.

      John Deere 300C vs. Link-Belt D30

      4 reasons to buy John Deere 300C:

      Sizes

      Clearance 511 mm and 484 mm 5 % more or 27 mm

      Motor

      Displacement 15.1 l. and 10.8 l. 28 % more or 4.3 l.

      Dump

      Lowering time 7 sec and 8 sec 12 % less or 1 sec
      Volume with top 16.8 m3 and 16.5 m3 2 % more or 0.3 m3

      12 reasons to buy Link-Belt D30:

      Sizes

      Unloading ground clearance 975 mm and 640 mm 34 % more or 335 mm

      Operation

      Fuel Capacity 325 l. and 268.8 l. 17 % more or 56.2 l.
      Hydraulic system fluid volume 200 l. and 79.5 l. 60 % more or 120.5 l.
      Cooling system fluid volume 43 l. and 37.9 l. 12 % more or 5.1 l.
      Engine oil volume 34 l. and 30.3 l. 11 % more or 3.7 l.
      Transmission fluid volume 19 l. and 15.9 l. 16 % more or 3.1 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes

      Motor

      Full power 201.3 kW and 194.6 kW 3 % more or 6.7 kW
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev
      Maximum torque 1233.8 Nm and 980.3 Nm 21 % more or 253.5 Nm

      Gear box

      Maximum speed 48.3 km/h and 46.7 km/h 3 % more or 1.6 km/h

      Dump

      Lifting time 10 sec and 14 sec 29 % less or 4 sec

      Neutral reasons:

      Weight

      Front axle unloaded 9139.9 kg and 8999.7 kg
      Unloaded rear axle 4990 kg and 8999.7 kg
      Full empty 19319.9 kg and 17999.5 kg
      Maximum loading 46319.9 kg and 45000 kg

      Sizes

      Dimensional length 9213 mm and 9494 mm
      Unloading height 6079 mm and 6000 mm
      Overall width 3283 mm and 2860 mm
      Headroom 3423 mm and 3460 mm
      Wheelbase 4119 mm and 5583 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 23.5R25 and 23.5 R25

      Motor

      Power measured at 2100 rev / min and 2100 rev / min
      Aspiration natural aspiration and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Daimler Chrysler and Cummins
      Model OM442 and M11-C270

      Gear box

      Reverse gears number 3 and 3
      Forward gears number 6 and 6
      Transmission type ZF 6WG 210 camshaft design with built-in power take-off, gears with full mesh, hydraulic multi-plate clutch, electronic control, hydrodynamic torque converter with a lock, integral PTO drive and powershift

      Dump

      Nominal payload 26999.6 kg and 27215.5 kg
      Brimmed volume 13 m3 and 13 m3
      Discharge angle 65 degrees and 70 degrees

      Images

      Sizes

      5. Clearance 511 mm 5. Clearance 484 mm
      6. Unloading height 6079 mm 6. Unloading height 6000 mm
      7. Unloading ground clearance 640 mm 7. Unloading ground clearance 975 mm
      1. Dimensional length 9213 mm 1. Dimensional length 9494 mm
      2. Overall width 3283 mm 2. Overall width 2860 mm
      3. Headroom 3423 mm 3. Headroom 3460 mm
      4. Wheelbase 4119 mm 4. Wheelbase 5583 mm

      Dump

      8. Discharge angle 65 degrees 8. Discharge angle 70 degrees