vs.

      John Deere 350C vs. Link-Belt D16

      14 reasons to buy John Deere 350C:

      Sizes

      Clearance 569 mm and 490 mm 14 % more or 79 mm

      Operation

      Engine oil volume 34 l. and 14 l. 59 % more or 20 l.
      Transmission fluid volume 28 l. and 22 l. 21 % more or 6 l.
      Fuel Capacity 400 l. and 170 l. 57 % more or 230 l.
      Hydraulic system fluid volume 140 l. and 100 l. 29 % more or 40 l.
      Cooling system fluid volume 34 l. and 31 l. 9 % more or 3 l.

      Motor

      Full power 257.3 kW and 102.2 kW 60 % more or 155.1 kW
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Displacement 14.6 l. and 5.9 l. 60 % more or 8.7 l.
      Maximum torque 1605.3 Nm and 612.8 Nm 62 % more or 992.5 Nm

      Gear box

      Maximum speed 50 km/h and 47.8 km/h 4 % more or 2.2 km/h

      Dump

      Lowering time 10 sec and 20 sec 50 % less or 10 sec
      Brimmed volume 15 m3 and 7.3 m3 51 % more or 7.7 m3
      Volume with top 19.6 m3 and 9 m3 54 % more or 10.6 m3

      6 reasons to buy Link-Belt D16:

      Sizes

      Unloading ground clearance 975 mm and 765 mm 22 % more or 210 mm

      Operation

      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes

      Motor

      Torque measured at 1400 rev / min and 1000 rev / min 29 % more or 400 rev

      Gear box

      Forward gears number 8 and 5 37 % more or 3
      Reverse gears number 4 and 1 75 % more or 3

      Dump

      Lifting time 16 sec and 19 sec 16 % less or 3 sec

      Neutral reasons:

      Weight

      Maximum loading 58890 kg and 24640.5 kg
      Front axle unloaded 13530 kg and 6422 kg
      Unloaded rear axle 6530 kg and 3703.6 kg
      Full empty 26890 kg and 10125.5 kg

      Sizes

      Dimensional length 10545 mm and 7145 mm
      Overall width 3200 mm and 2500 mm
      Headroom 3631 mm and 3260 mm
      Wheelbase 4474 mm and 4000 mm
      Unloading height 6950 mm and 4700 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 26.5R25 and 20.5 R25

      Motor

      Manufacturer Daimler Chrysler and Cummins
      Model OM442A and 6BT5.9
      Aspiration turbocharging and turbocharging

      Gear box

      Transmission type Allison HD4560 installed on the engine automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock and powershift

      Dump

      Discharge angle 70 degrees and 70 degrees
      Nominal payload 32000 kg and 14515 kg

      Images

      Sizes

      1. Dimensional length 10545 mm 1. Dimensional length 7145 mm
      2. Overall width 3200 mm 2. Overall width 2500 mm
      3. Headroom 3631 mm 3. Headroom 3260 mm
      4. Wheelbase 4474 mm 4. Wheelbase 4000 mm
      5. Clearance 569 mm 5. Clearance 490 mm
      6. Unloading height 6950 mm 6. Unloading height 4700 mm
      7. Unloading ground clearance 765 mm 7. Unloading ground clearance 975 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 70 degrees