- Home/
- Comparison/
- Articulated Hauler/
- John Deere 350C vs. Moxy MT41
John Deere 350C vs. Moxy MT41
4 reasons to buy John Deere 350C:
Operation
Engine oil volume | 34 l. and 13.2 l. | 61 % more or 20.8 l. |
Motor
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Displacement | 14.6 l. and 11.7 l. | 20 % more or 2.9 l. |
Dump
Lowering time | 10 sec and 11 sec | 9 % less or 1 sec |
16 reasons to buy Moxy MT41:
Sizes
Clearance | 652 mm and 569 mm | 13 % more or 83 mm |
Unloading ground clearance | 800 mm and 765 mm | 4 % more or 35 mm |
Operation
Fuel Capacity | 490 l. and 400 l. | 18 % more or 90 l. |
Hydraulic system fluid volume | 275 l. and 140 l. | 49 % more or 135 l. |
Cooling system fluid volume | 50 l. and 34 l. | 32 % more or 16 l. |
Transmission fluid volume | 55 l. and 28 l. | 49 % more or 27 l. |
Generator current strength | 100 amperes and 55 amperes | 45 % more or 45 amperes |
Motor
Torque measured at | 1200 rev / min and 1000 rev / min | 17 % more or 200 rev |
Full power | 331 kW and 257.3 kW | 22 % more or 73.7 kW |
Maximum torque | 1854 Nm and 1605.3 Nm | 13 % more or 248.7 Nm |
Gear box
Forward gears number | 6 and 5 | 17 % more or 1 |
Reverse gears number | 3 and 1 | 67 % more or 2 |
Maximum speed | 53 km/h and 50 km/h | 6 % more or 3 km/h |
Dump
Brimmed volume | 18.5 m3 and 15 m3 | 19 % more or 3.5 m3 |
Volume with top | 24 m3 and 19.6 m3 | 18 % more or 4.4 m3 |
Lifting time | 12 sec and 19 sec | 37 % less or 7 sec |
Neutral reasons:
Weight
Unloaded rear axle | 6530 kg and 13200 kg |
Loaded front axle | 19716 kg and 20000 kg |
Front axle unloaded | 13530 kg and 13950 kg |
Loaded rear axle | 19707 kg and 44350 kg |
Full empty | 26890 kg and 27150 kg |
Maximum loading | 58890 kg and 64350 kg |
Sizes
Wheelbase | 4474 mm and 5360 mm |
Dimensional length | 10545 mm and 10450 mm |
Overall width | 3200 mm and 3475 mm |
Unloading height | 6950 mm and 6545 mm |
Headroom | 3631 mm and 3800 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 26.5R25 and 29.5R25 |
Motor
Model | OM442A and DC 12 |
Aspiration | turbocharging and turbocharging |
Manufacturer | Daimler Chrysler and Scania |
Gear box
Transmission type | Allison HD4560 installed on the engine automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock and ZF 6 WG 310 Dash 4 electronically controlled fully automatic transmission system |
Dump
Nominal payload | 32000 kg and 37200 kg |
Discharge angle | 70 degrees and 70 degrees |
Images
Sizes
5. Clearance | 569 mm | 5. Clearance | 652 mm |
6. Unloading height | 6950 mm | 6. Unloading height | 6545 mm |
7. Unloading ground clearance | 765 mm | 7. Unloading ground clearance | 800 mm |
1. Dimensional length | 10545 mm | 1. Dimensional length | 10450 mm |
2. Overall width | 3200 mm | 2. Overall width | 3475 mm |
3. Headroom | 3631 mm | 3. Headroom | 3800 mm |
4. Wheelbase | 4474 mm | 4. Wheelbase | 5360 mm |
Dump
8. Discharge angle | 70 degrees | 8. Discharge angle | 70 degrees |