- Home/
- Comparison/
- Articulated Hauler/
- John Deere 400C vs. John Deere 250D
John Deere 400C vs. John Deere 250D
13 reasons to buy John Deere 400C:
Sizes
Unloading ground clearance | 815 mm and 580 mm | 29 % more or 235 mm |
Clearance | 619 mm and 430 mm | 31 % more or 189 mm |
Operation
Fuel Capacity | 400 l. and 340 l. | 15 % more or 60 l. |
Hydraulic system fluid volume | 140 l. and 79 l. | 44 % more or 61 l. |
Cooling system fluid volume | 64 l. and 32.9 l. | 49 % more or 31.1 l. |
Engine oil volume | 34 l. and 25.5 l. | 25 % more or 8.5 l. |
Transmission fluid volume | 28 l. and 21.8 l. | 22 % more or 6.2 l. |
Motor
Effective power | 305.7 kW and 197.6 kW | 35 % more or 108.1 kW |
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Displacement | 14.6 l. and 9 l. | 38 % more or 5.6 l. |
Maximum torque | 1749 Nm and 1069.7 Nm | 39 % more or 679.3 Nm |
Dump
Brimmed volume | 17 m3 and 10.5 m3 | 38 % more or 6.5 m3 |
Volume with top | 22 m3 and 13.8 m3 | 37 % more or 8.2 m3 |
6 reasons to buy John Deere 250D:
Operation
Generator current strength | 80 amperes and 55 amperes | 31 % more or 25 amperes |
Motor
Torque measured at | 1400 rev / min and 1200 rev / min | 14 % more or 200 rev |
Gear box
Forward gears number | 6 and 5 | 17 % more or 1 |
Maximum speed | 50 km/h and 49 km/h | 2 % more or 1 km/h |
Dump
Lifting time | 11.9 sec and 19 sec | 37 % less or 7.1 sec |
Lowering time | 6 sec and 10 sec | 40 % less or 4 sec |
Neutral reasons:
Weight
Loaded front axle | 20730 kg and 13160 kg |
Loaded central axis | 22210 kg and 14240 kg |
Loaded rear axle | 22010 kg and 14100 kg |
Full empty | 28450 kg and 18300 kg |
Maximum loading | 64950 kg and 41500 kg |
Front axle unloaded | 14190 kg and 10140 kg |
Unloaded central axis | 7280 kg and 4080 kg |
Unloaded rear axle | 6980 kg and 4070 kg |
Sizes
Unloading height | 7193 mm and 6120 mm |
Dimensional length | 10671 mm and 9500 mm |
Overall width | 3380 mm and 2820 mm |
Headroom | 3681 mm and 3480 mm |
Wheelbase | 4474 mm and 5010 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 29.5R25 and 23.5R25 |
Motor
Aspiration | turbocharging and cooling at the outlet and Turbocharger with charge air cooler by oncoming air flow |
Manufacturer | Daimler Chrysler and John Deere |
Model | OM442LA and 6090 |
Gear box
Transmission type | Allison HD4560 installed on the engine automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock and ZF 6 HP592C automatic |
Reverse gears number | 1 and 1 |
Dump
Discharge angle | 70 degrees and 70 degrees |
Nominal payload | 36500 kg and 23200 kg |
Images
Sizes
1. Dimensional length | 10671 mm | 1. Dimensional length | 9500 mm |
2. Overall width | 3380 mm | 2. Overall width | 2820 mm |
3. Headroom | 3681 mm | 3. Headroom | 3480 mm |
4. Wheelbase | 4474 mm | 4. Wheelbase | 5010 mm |
5. Clearance | 619 mm | 5. Clearance | 430 mm |
6. Unloading height | 7193 mm | 6. Unloading height | 6120 mm |
7. Unloading ground clearance | 815 mm | 7. Unloading ground clearance | 580 mm |
Dump
8. Discharge angle | 70 degrees | 8. Discharge angle | 70 degrees |