- Home/
- Comparison/
- Articulated Hauler/
- John Deere 400C vs. Link-Belt D25
John Deere 400C vs. Link-Belt D25
11 reasons to buy John Deere 400C:
Sizes
Clearance | 619 mm and 510 mm | 18 % more or 109 mm |
Operation
Fuel Capacity | 400 l. and 325 l. | 19 % more or 75 l. |
Cooling system fluid volume | 64 l. and 37 l. | 42 % more or 27 l. |
Transmission fluid volume | 28 l. and 23 l. | 18 % more or 5 l. |
Motor
Full power | 319.9 kW and 190.2 kW | 41 % more or 129.7 kW |
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Displacement | 14.6 l. and 8.3 l. | 43 % more or 6.3 l. |
Maximum torque | 1749 Nm and 1016.9 Nm | 42 % more or 732.1 Nm |
Dump
Brimmed volume | 17 m3 and 10.7 m3 | 37 % more or 6.3 m3 |
Volume with top | 22 m3 and 13.3 m3 | 40 % more or 8.7 m3 |
Lowering time | 10 sec and 16 sec | 37 % less or 6 sec |
8 reasons to buy Link-Belt D25:
Sizes
Unloading ground clearance | 890 mm and 815 mm | 8 % more or 75 mm |
Operation
Hydraulic system fluid volume | 200 l. and 140 l. | 30 % more or 60 l. |
Generator current strength | 70 amperes and 55 amperes | 21 % more or 15 amperes |
Motor
Torque measured at | 1500 rev / min and 1200 rev / min | 20 % more or 300 rev |
Gear box
Forward gears number | 8 and 5 | 37 % more or 3 |
Reverse gears number | 4 and 1 | 75 % more or 3 |
Maximum speed | 64.9 km/h and 49 km/h | 24 % more or 15.9 km/h |
Dump
Lifting time | 14 sec and 19 sec | 26 % less or 5 sec |
Neutral reasons:
Weight
Unloaded rear axle | 6980 kg and 4614.4 kg |
Full empty | 28450 kg and 18007.6 kg |
Maximum loading | 64950 kg and 40687.2 kg |
Front axle unloaded | 14190 kg and 8637.3 kg |
Unloaded central axis | 7280 kg and 4755.5 kg |
Sizes
Unloading height | 7193 mm and 6190 mm |
Dimensional length | 10671 mm and 9320 mm |
Overall width | 3380 mm and 2673 mm |
Headroom | 3681 mm and 3410 mm |
Wheelbase | 4474 mm and 5595 mm |
Operation
Engine oil volume | 34 l. and 34 l. |
Operating voltage | 24 V and 24 V |
Tyre size | 29.5R25 and 23.5 R25 |
Motor
Aspiration | turbocharging and cooling at the outlet and Turbocharging with subsequent air cooling (by a cooling radiator) |
Manufacturer | Daimler Chrysler and Cummins |
Model | OM442LA and 6CTA8.3C |
Gear box
Transmission type | Allison HD4560 installed on the engine automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock and powershift |
Dump
Nominal payload | 36500 kg and 22679.6 kg |
Discharge angle | 70 degrees and 70 degrees |
Images
Sizes
1. Dimensional length | 10671 mm | 1. Dimensional length | 9320 mm |
2. Overall width | 3380 mm | 2. Overall width | 2673 mm |
3. Headroom | 3681 mm | 3. Headroom | 3410 mm |
4. Wheelbase | 4474 mm | 4. Wheelbase | 5595 mm |
5. Clearance | 619 mm | 5. Clearance | 510 mm |
6. Unloading height | 7193 mm | 6. Unloading height | 6190 mm |
7. Unloading ground clearance | 815 mm | 7. Unloading ground clearance | 890 mm |
Dump
8. Discharge angle | 70 degrees | 8. Discharge angle | 70 degrees |