vs.

      Link-Belt D300 vs. JCB 718

      11 reasons to buy Link-Belt D300:

      Sizes

      Clearance 526 mm and 420 mm 20 % more or 106 mm
      Unloading ground clearance 830 mm and 470 mm 43 % more or 360 mm

      Operation

      Fuel Capacity 325 l. and 210.1 l. 35 % more or 114.9 l.
      Hydraulic system fluid volume 300 l. and 160.1 l. 47 % more or 139.9 l.
      Engine oil volume 33 l. and 16.3 l. 51 % more or 16.7 l.
      Transmission fluid volume 38 l. and 34.8 l. 8 % more or 3.2 l.

      Motor

      Full power 223.7 kW and 129 kW 42 % more or 94.7 kW
      Maximum torque 1376.2 Nm and 786.4 Nm 43 % more or 589.8 Nm
      Effective power 213.3 kW and 125.3 kW 41 % more or 88.0 kW
      Displacement 10.8 l. and 5.9 l. 45 % more or 4.9 l.

      Dump

      Volume with top 16 m3 and 9.6 m3 40 % more or 6.4 m3

      5 reasons to buy JCB 718:

      Operation

      Cooling system fluid volume 32.9 l. and 13 l. 60 % more or 19.9 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Gear box

      Maximum speed 50 km/h and 44.6 km/h 11 % more or 5.4 km/h

      Dump

      Lifting time 12 sec and 14 sec 14 % less or 2 sec
      Lowering time 8 sec and 16 sec 50 % less or 8 sec

      Neutral reasons:

      Weight

      Unloaded rear axle 9800.3 kg and 4829.9 kg
      Full empty 19590.2 kg and 12450.2 kg
      Maximum loading 46589.8 kg and 28780 kg
      Front axle unloaded 9789.9 kg and 7619.9 kg

      Sizes

      Overall width 2795 mm and 2607 mm
      Headroom 3517 mm and 3560 mm
      Wheelbase 5183 mm and 4220 mm
      Unloading height 6394 mm and 4505 mm
      Dimensional length 9608 mm and 7524 mm

      Operation

      Operating voltage 24 V and 24 V
      Generator current strength 70 amperes and 70 amperes
      Tyre size 23.5 R25 and 650/65R25

      Motor

      Cylinders number 6 and 6
      Aspiration turbocharging and turbocharging/forced air cooling
      Torque measured at 1300 rev / min and 1300 rev / min
      Manufacturer Cummins and Cummins
      Model MTA 11-C and 6BTAA

      Gear box

      Transmission type powershift and plain gear-changing
      Forward gears number 6 and 6
      Reverse gears number 3 and 3

      Dump

      Nominal payload 27000.1 kg and 16329.3 kg
      Discharge angle 67 degrees and 84 degrees

      Images

      Sizes

      5. Clearance 526 mm 5. Clearance 420 mm
      6. Unloading height 6394 mm 6. Unloading height 4505 mm
      7. Unloading ground clearance 830 mm 7. Unloading ground clearance 470 mm
      1. Dimensional length 9608 mm 1. Dimensional length 7524 mm
      2. Overall width 2795 mm 2. Overall width 2607 mm
      3. Headroom 3517 mm 3. Headroom 3560 mm
      4. Wheelbase 5183 mm 4. Wheelbase 4220 mm

      Dump

      8. Discharge angle 67 degrees 8. Discharge angle 84 degrees