- Home/
- Comparison/
- Articulated Hauler/
- Terex 3066C vs. John Deere 300D
Terex 3066C vs. John Deere 300D
11 reasons to buy Terex 3066C:
Sizes
Clearance | 505 mm and 430 mm | 15 % more or 75 mm |
Unloading ground clearance | 660 mm and 510 mm | 23 % more or 150 mm |
Operation
Hydraulic system fluid volume | 199.9 l. and 79 l. | 60 % more or 120.9 l. |
Cooling system fluid volume | 54.1 l. and 32.9 l. | 39 % more or 21.2 l. |
Engine oil volume | 39.7 l. and 25.5 l. | 36 % more or 14.2 l. |
Transmission fluid volume | 51.1 l. and 21.8 l. | 57 % more or 29.3 l. |
Motor
Displacement | 10.8 l. and 9 l. | 17 % more or 1.8 l. |
Maximum torque | 1376.2 Nm and 1069.7 Nm | 22 % more or 306.5 Nm |
Effective power | 214 kW and 212.5 kW | 1 % more or 1.5 kW |
Gear box
Reverse gears number | 3 and 1 | 67 % more or 2 |
Dump
Brimmed volume | 13 m3 and 12.6 m3 | 3 % more or 0.4 m3 |
8 reasons to buy John Deere 300D:
Operation
Fuel Capacity | 340 l. and 246.1 l. | 28 % more or 93.9 l. |
Generator current strength | 80 amperes and 70 amperes | 12 % more or 10 amperes |
Motor
Power measured at | 2200 rev / min and 2100 rev / min | 5 % more or 100 rev |
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Gear box
Maximum speed | 50 km/h and 45.1 km/h | 10 % more or 4.9 km/h |
Dump
Volume with top | 16.6 m3 and 16 m3 | 4 % more or 0.6 m3 |
Lifting time | 11.9 sec and 13 sec | 8 % less or 1.1 sec |
Lowering time | 6 sec and 9 sec | 33 % less or 3 sec |
Neutral reasons:
Weight
Front axle unloaded | 10585 kg and 10410 kg |
Unloaded central axis | 5000 kg and 4550 kg |
Unloaded rear axle | 4970 kg and 4540 kg |
Loaded front axle | 14450 kg and 14050 kg |
Loaded central axis | 16545 kg and 16450 kg |
Loaded rear axle | 16560 kg and 16300 kg |
Full empty | 20555 kg and 19500 kg |
Maximum loading | 47555 kg and 46800 kg |
Sizes
Dimensional length | 9445 mm and 9580 mm |
Overall width | 2820 mm and 2950 mm |
Headroom | 3405 mm and 3480 mm |
Wheelbase | 4940 mm and 5010 mm |
Unloading height | 5885 mm and 6200 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 23.5 R 25 and 23.5R25 |
Motor
Aspiration | turbocharging and cooling at the outlet and Turbocharger with charge air cooler by oncoming air flow |
Cylinders number | 6 and 6 |
Manufacturer | Cummins and John Deere |
Model | MTA11-C300 and 6090 |
Gear box
Transmission type | ZF 6WG 250 and ZF 6 HP592C automatic |
Forward gears number | 6 and 6 |
Dump
Nominal payload | 27000 kg and 27300 kg |
Discharge angle | 65 degrees and 70 degrees |
Images
Sizes
7. Unloading ground clearance | 660 mm | 7. Unloading ground clearance | 510 mm |
1. Dimensional length | 9445 mm | 1. Dimensional length | 9580 mm |
2. Overall width | 2820 mm | 2. Overall width | 2950 mm |
3. Headroom | 3405 mm | 3. Headroom | 3480 mm |
4. Wheelbase | 4940 mm | 4. Wheelbase | 5010 mm |
5. Clearance | 505 mm | 5. Clearance | 430 mm |
6. Unloading height | 5885 mm | 6. Unloading height | 6200 mm |
Dump
8. Discharge angle | 65 degrees | 8. Discharge angle | 70 degrees |