- Home/
- Comparison/
- Articulated Hauler/
- Terex TA30-IS vs. John Deere 400C
Terex TA30-IS vs. John Deere 400C
10 reasons to buy Terex TA30-IS:
Operation
Hydraulic system fluid volume | 202 l. and 140 l. | 31 % more or 62 l. |
Transmission fluid volume | 63 l. and 28 l. | 56 % more or 35 l. |
Generator current strength | 70 amperes and 55 amperes | 21 % more or 15 amperes |
Motor
Torque measured at | 1400 rev / min and 1200 rev / min | 14 % more or 200 rev |
Maximum torque | 1776.1 Nm and 1749 Nm | 2 % more or 27.1 Nm |
Gear box
Forward gears number | 6 and 5 | 17 % more or 1 |
Reverse gears number | 3 and 1 | 67 % more or 2 |
Maximum speed | 51 km/h and 49 km/h | 4 % more or 2 km/h |
Dump
Lifting time | 12 sec and 19 sec | 37 % less or 7 sec |
Lowering time | 7.5 sec and 10 sec | 25 % less or 2.5 sec |
9 reasons to buy John Deere 400C:
Sizes
Unloading ground clearance | 815 mm and 725 mm | 11 % more or 90 mm |
Clearance | 619 mm and 405 mm | 35 % more or 214 mm |
Operation
Fuel Capacity | 400 l. and 390 l. | 2 % more or 10 l. |
Cooling system fluid volume | 64 l. and 54 l. | 16 % more or 10 l. |
Motor
Full power | 319.9 kW and 287.1 kW | 10 % more or 32.8 kW |
Effective power | 305.7 kW and 248.3 kW | 19 % more or 57.4 kW |
Displacement | 14.6 l. and 10.8 l. | 26 % more or 3.8 l. |
Dump
Brimmed volume | 17 m3 and 13.8 m3 | 19 % more or 3.2 m3 |
Volume with top | 22 m3 and 17.5 m3 | 20 % more or 4.5 m3 |
Neutral reasons:
Weight
Loaded central axis | 16719.4 kg and 22210 kg |
Loaded rear axle | 16946.2 kg and 22010 kg |
Full empty | 22421.1 kg and 28450 kg |
Maximum loading | 50421.3 kg and 64950 kg |
Front axle unloaded | 11720.8 kg and 14190 kg |
Unloaded central axis | 5300.2 kg and 7280 kg |
Unloaded rear axle | 5400 kg and 6980 kg |
Loaded front axle | 16801.1 kg and 20730 kg |
Sizes
Dimensional length | 9755 mm and 10671 mm |
Overall width | 2895 mm and 3380 mm |
Headroom | 3450 mm and 3681 mm |
Wheelbase | 5100 mm and 4474 mm |
Unloading height | 6110 mm and 7193 mm |
Operation
Engine oil volume | 34 l. and 34 l. |
Operating voltage | 24 V and 24 V |
Tyre size | 23.5R25 and 29.5R25 |
Motor
Manufacturer | Cummins and Daimler Chrysler |
Model | QSM11 and OM442LA |
Power measured at | 2100 rev / min and 2100 rev / min |
Aspiration | turbocharging and turbocharging and cooling at the outlet |
Gear box
Transmission type | ZF 6WG 310 RPC and Allison HD4560 installed on the engine automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock |
Dump
Nominal payload | 28000.3 kg and 36500 kg |
Discharge angle | 65 degrees and 70 degrees |
Images
Sizes
1. Dimensional length | 9755 mm | 1. Dimensional length | 10671 mm |
2. Overall width | 2895 mm | 2. Overall width | 3380 mm |
3. Headroom | 3450 mm | 3. Headroom | 3681 mm |
4. Wheelbase | 5100 mm | 4. Wheelbase | 4474 mm |
5. Clearance | 405 mm | 5. Clearance | 619 mm |
6. Unloading height | 6110 mm | 6. Unloading height | 7193 mm |
7. Unloading ground clearance | 725 mm | 7. Unloading ground clearance | 815 mm |
Dump
8. Discharge angle | 65 degrees | 8. Discharge angle | 70 degrees |