vs.

      Terex TA30 vs. Moxy MT41

      6 reasons to buy Terex TA30:

      Operation

      Cooling system fluid volume 54 l. and 50 l. 7 % more or 4 l.
      Engine oil volume 34 l. and 13.2 l. 61 % more or 20.8 l.
      Transmission fluid volume 63 l. and 55 l. 13 % more or 8 l.

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev
      Torque measured at 1400 rev / min and 1200 rev / min 14 % more or 200 rev

      Dump

      Lowering time 7.5 sec and 11 sec 32 % less or 3.5 sec

      11 reasons to buy Moxy MT41:

      Sizes

      Clearance 652 mm and 405 mm 38 % more or 247 mm
      Unloading ground clearance 800 mm and 725 mm 9 % more or 75 mm

      Operation

      Generator current strength 100 amperes and 70 amperes 30 % more or 30 amperes
      Fuel Capacity 490 l. and 390 l. 20 % more or 100 l.
      Hydraulic system fluid volume 275 l. and 202 l. 27 % more or 73 l.

      Motor

      Full power 331 kW and 287.1 kW 13 % more or 43.9 kW
      Displacement 11.7 l. and 10.8 l. 8 % more or 0.9 l.
      Maximum torque 1854 Nm and 1776.1 Nm 4 % more or 77.9 Nm

      Gear box

      Maximum speed 53 km/h and 51 km/h 4 % more or 2 km/h

      Dump

      Volume with top 24 m3 and 17.5 m3 27 % more or 6.5 m3
      Brimmed volume 18.5 m3 and 13.8 m3 25 % more or 4.7 m3

      Neutral reasons:

      Weight

      Front axle unloaded 11720.8 kg and 13950 kg
      Unloaded rear axle 5400 kg and 13200 kg
      Loaded front axle 16801.1 kg and 20000 kg
      Loaded rear axle 16946.2 kg and 44350 kg
      Full empty 22421.1 kg and 27150 kg
      Maximum loading 50421.3 kg and 64350 kg

      Sizes

      Dimensional length 9755 mm and 10450 mm
      Overall width 2895 mm and 3475 mm
      Headroom 3450 mm and 3800 mm
      Wheelbase 5100 mm and 5360 mm
      Unloading height 6110 mm and 6545 mm

      Operation

      Tyre size 23.5R25 and 29.5R25
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Cummins and Scania
      Model QSM11 and DC 12
      Aspiration turbocharging and turbocharging
      Cylinders number 6 and 6

      Gear box

      Transmission type ZF 6WG 310 RPC automatic and ZF 6 WG 310 Dash 4 electronically controlled fully automatic transmission system
      Forward gears number 6 and 6
      Reverse gears number 3 and 3

      Dump

      Lifting time 12 sec and 12 sec
      Discharge angle 65 degrees and 70 degrees
      Nominal payload 28000.3 kg and 37200 kg

      Images

      Sizes

      1. Dimensional length 9755 mm 1. Dimensional length 10450 mm
      2. Overall width 2895 mm 2. Overall width 3475 mm
      3. Headroom 3450 mm 3. Headroom 3800 mm
      4. Wheelbase 5100 mm 4. Wheelbase 5360 mm
      5. Clearance 405 mm 5. Clearance 652 mm
      6. Unloading height 6110 mm 6. Unloading height 6545 mm
      7. Unloading ground clearance 725 mm 7. Unloading ground clearance 800 mm

      Dump

      8. Discharge angle 65 degrees 8. Discharge angle 70 degrees