- Home/
- Comparison/
- Articulated Hauler/
- Terex TA40 vs. John Deere 300C
Terex TA40 vs. John Deere 300C
16 reasons to buy Terex TA40:
Sizes
Unloading ground clearance | 900 mm and 640 mm | 29 % more or 260 mm |
Clearance | 900 mm and 511 mm | 43 % more or 389 mm |
Operation
Fuel Capacity | 450 l. and 268.8 l. | 40 % more or 181.2 l. |
Hydraulic system fluid volume | 330 l. and 79.5 l. | 76 % more or 250.5 l. |
Cooling system fluid volume | 67 l. and 37.9 l. | 43 % more or 29.1 l. |
Engine oil volume | 32 l. and 30.3 l. | 5 % more or 1.7 l. |
Transmission fluid volume | 61 l. and 15.9 l. | 74 % more or 45.1 l. |
Generator current strength | 100 amperes and 55 amperes | 45 % more or 45 amperes |
Motor
Full power | 335.6 kW and 194.6 kW | 42 % more or 141.0 kW |
Effective power | 325.9 kW and 187.2 kW | 43 % more or 138.7 kW |
Torque measured at | 1350 rev / min and 1300 rev / min | 4 % more or 50 rev |
Maximum torque | 2098.8 Nm and 980.3 Nm | 53 % more or 1118.5 Nm |
Gear box
Maximum speed | 60 km/h and 46.7 km/h | 22 % more or 13.3 km/h |
Dump
Brimmed volume | 17.4 m3 and 13 m3 | 25 % more or 4.4 m3 |
Volume with top | 23.3 m3 and 16.8 m3 | 28 % more or 6.5 m3 |
Lifting time | 12.5 sec and 14 sec | 11 % less or 1.5 sec |
4 reasons to buy John Deere 300C:
Motor
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Displacement | 15.1 l. and 14 l. | 7 % more or 1.1 l. |
Gear box
Reverse gears number | 3 and 1 | 67 % more or 2 |
Dump
Lowering time | 7 sec and 8 sec | 12 % less or 1 sec |
Neutral reasons:
Weight
Loaded central axis | 24947.6 kg and 15965.1 kg |
Loaded front axle | 18281.6 kg and 14589.8 kg |
Loaded rear axle | 24947.6 kg and 15765.1 kg |
Full empty | 30755.4 kg and 19319.9 kg |
Maximum loading | 68755.1 kg and 46319.9 kg |
Front axle unloaded | 15846.7 kg and 9139.9 kg |
Unloaded central axis | 7484.3 kg and 5190 kg |
Unloaded rear axle | 7424.4 kg and 4990 kg |
Sizes
Unloading height | 6900 mm and 6079 mm |
Dimensional length | 10900 mm and 9213 mm |
Overall width | 3400 mm and 3283 mm |
Headroom | 3900 mm and 3423 mm |
Wheelbase | 5300 mm and 4119 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 29.5R25 and 23.5R25 |
Motor
Aspiration | turbocharging and natural aspiration |
Manufacturer | Detroit diesel and Daimler Chrysler |
Model | lot 60 and OM442 |
Gear box
Transmission type | Allison 4500 ORS fully automatic transmission with a planetary gearshift mechanism and ZF 6WG 210 camshaft design with built-in power take-off, gears with full mesh, hydraulic multi-plate clutch, electronic control, hydrodynamic torque converter with a lock, integral PTO drive |
Forward gears number | 6 and 6 |
Dump
Nominal payload | 37999.7 kg and 26999.6 kg |
Discharge angle | 66 degrees and 65 degrees |
Images
Sizes
1. Dimensional length | 10900 mm | 1. Dimensional length | 9213 mm |
2. Overall width | 3400 mm | 2. Overall width | 3283 mm |
3. Headroom | 3900 mm | 3. Headroom | 3423 mm |
4. Wheelbase | 5300 mm | 4. Wheelbase | 4119 mm |
5. Clearance | 900 mm | 5. Clearance | 511 mm |
6. Unloading height | 6900 mm | 6. Unloading height | 6079 mm |
7. Unloading ground clearance | 900 mm | 7. Unloading ground clearance | 640 mm |
Dump
8. Discharge angle | 66 degrees | 8. Discharge angle | 65 degrees |