- Home/
- Comparison/
- Articulated Hauler/
- Volvo A25D vs. John Deere 350C
Volvo A25D vs. John Deere 350C
11 reasons to buy Volvo A25D:
Sizes
Clearance | 595 mm and 569 mm | 4 % more or 26 mm |
Unloading ground clearance | 773 mm and 765 mm | 1 % more or 8 mm |
Operation
Hydraulic system fluid volume | 175 l. and 140 l. | 20 % more or 35 l. |
Cooling system fluid volume | 71 l. and 34 l. | 52 % more or 37 l. |
Engine oil volume | 38 l. and 34 l. | 11 % more or 4 l. |
Transmission fluid volume | 41 l. and 28 l. | 32 % more or 13 l. |
Motor
Torque measured at | 1350 rev / min and 1000 rev / min | 26 % more or 350 rev |
Gear box
Reverse gears number | 2 and 1 | 50 % more or 1 |
Maximum speed | 53 km/h and 50 km/h | 6 % more or 3 km/h |
Forward gears number | 6 and 5 | 17 % more or 1 |
Dump
Lowering time | 9 sec and 10 sec | 10 % less or 1 sec |
7 reasons to buy John Deere 350C:
Motor
Effective power | 249.8 kW and 230.4 kW | 8 % more or 19.4 kW |
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Displacement | 14.6 l. and 9.6 l. | 34 % more or 5.0 l. |
Full power | 257.3 kW and 231.2 kW | 10 % more or 26.1 kW |
Maximum torque | 1605.3 Nm and 1365 Nm | 15 % more or 240.3 Nm |
Dump
Volume with top | 19.6 m3 and 13 m3 | 34 % more or 6.6 m3 |
Brimmed volume | 15 m3 and 9.5 m3 | 37 % more or 5.5 m3 |
Neutral reasons:
Weight
Front axle unloaded | 12400 kg and 13530 kg |
Unloaded rear axle | 7070 kg and 6530 kg |
Loaded front axle | 15650 kg and 19716 kg |
Loaded rear axle | 27920 kg and 19707 kg |
Full empty | 19470 kg and 26890 kg |
Maximum loading | 43470 kg and 58890 kg |
Sizes
Wheelbase | 4254 mm and 4474 mm |
Unloading height | 5176 mm and 6950 mm |
Dimensional length | 9939 mm and 10545 mm |
Overall width | 3130 mm and 3200 mm |
Headroom | 3470 mm and 3631 mm |
Operation
Generator current strength | 55 amperes and 55 amperes |
Tyre size | 23.5 R 25 and 26.5R25 |
Fuel Capacity | 400 l. and 400 l. |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Volvo and Daimler Chrysler |
Model | D10BACE2* and OM442A |
Aspiration | turbocharging and turbocharging |
Gear box
Transmission type | Fully automatic and Allison HD4560 installed on the engine automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock |
Dump
Discharge angle | 74 degrees and 70 degrees |
Nominal payload | 24000 kg and 32000 kg |
Images
Sizes
1. Dimensional length | 9939 mm | 1. Dimensional length | 10545 mm |
2. Overall width | 3130 mm | 2. Overall width | 3200 mm |
3. Headroom | 3470 mm | 3. Headroom | 3631 mm |
4. Wheelbase | 4254 mm | 4. Wheelbase | 4474 mm |
5. Clearance | 595 mm | 5. Clearance | 569 mm |
6. Unloading height | 5176 mm | 6. Unloading height | 6950 mm |
7. Unloading ground clearance | 773 mm | 7. Unloading ground clearance | 765 mm |
Dump
8. Discharge angle | 74 degrees | 8. Discharge angle | 70 degrees |