- Home/
- Comparison/
- Crawler-Mounted Loader/
- Caterpillar 931C serie II LGP vs. John Deere 755C serie II
Caterpillar 931C serie II LGP vs. John Deere 755C serie II
6 reasons to buy Caterpillar 931C serie II LGP:
Operation
Maximum speed | 11.2 km/h and 10.9 km/h | 3 % more or 0.3 km/h |
Static tipping load | 4808 kg and 13795 kg | 65 % less or 8987 kg |
Breakout force in folded state | 69.2 kN and 164.9 kN | 58 % less or 95.7 kN |
Motor
Power measured at | 2400 rev / min and 1800 rev / min | 25 % more or 600 rev |
Hydraulic system
Lifting time | 6 sec and 6.5 sec | 8 % less or 0.5 sec |
Carrier
Specific ground pressure | 33 kPa and 75.8 kPa | 56 % less or 42.8 kPa |
18 reasons to buy John Deere 755C serie II:
Sizes
Width to outside of caterpillar track | 2308 mm and 2290 mm | 1 % more or 18 mm |
Clearance | 426 mm and 308 mm | 28 % more or 118 mm |
Ground clearance at full height and unloading | 3085 mm and 2666 mm | 14 % more or 419 mm |
Operation
Generator current strength | 55 amperes and 40 amperes | 27 % more or 15 amperes |
Fuel Capacity | 319.9 l. and 116 l. | 64 % more or 203.9 l. |
Cooling system fluid volume | 57.9 l. and 20 l. | 65 % more or 37.9 l. |
Engine oil volume | 22 l. and 12 l. | 45 % more or 10 l. |
Each final drive fluid volume | 68.1 l. and 12 l. | 82 % more or 56.1 l. |
Hydraulic system fluid volume | 174.9 l. and 57 l. | 67 % more or 117.9 l. |
Motor
Displacement | 10 l. and 5.2 l. | 48 % more or 4.8 l. |
Effective power | 132 kW and 51.5 kW | 61 % more or 80.5 kW |
Cylinders number | 6 and 4 | 33 % more or 2 |
Hydraulic system
Pump bandwidth | 208.2 l/min and 85.9 l/min | 59 % more or 122.3 l/min |
Unloading time | 2.1 sec and 2.7 sec | 22 % less or 0.6 sec |
Lowering time | 1.5 sec and 3.1 sec | 52 % less or 1.6 sec |
Carrier
Track shoes number per side | 39 and 37 | 5 % more or 2 |
Rolling bearings number on either side | 6 and 5 | 17 % more or 1 |
Contact with ground area | 2.7 m2 and 2.4 m2 | 11 % more or 0.3 m2 |
Neutral reasons:
Sizes
Length to front of caterpillar track | 2814 mm and 4801 mm |
Length with bucket on ground level | 4090 mm and 6832 mm |
Height to cab upper part | 2678 mm and 3304 mm |
Radius at high altitude unloading | 788 mm and 1192 mm |
Operation
Operating voltage | 12 V and 24 V |
Working weight | 8170 kg and 21001.3 kg |
Motor
Manufacturer | Caterpillar and Liebherr |
Model | 3204 and D 926 T-EA2 |
Hydraulic system
Type of pump | Gear type pump with single section and Variable displacement piston pump with load sensing proportional pump flow control |
Overflow valve pressure | 17236.9 kPa and 25993.2 kPa |
Carrier
Track shoe width | 635 mm and 508 mm |
Caterpillar track length on ground level | 1900 mm and 2673 mm |
Track width | 1651 mm and 1800 mm |
Images
Sizes
1. Length with bucket on ground level | 4090 mm | 1. Length with bucket on ground level | 6832 mm |
2. Width to outside of caterpillar track | 2290 mm | 2. Width to outside of caterpillar track | 2308 mm |
3. Height to cab upper part | 2678 mm | 3. Height to cab upper part | 3304 mm |
5. Clearance | 308 mm | 5. Clearance | 426 mm |
7. Ground clearance at full height and unloading | 2666 mm | 7. Ground clearance at full height and unloading | 3085 mm |
8. Radius at high altitude unloading | 788 mm | 8. Radius at high altitude unloading | 1192 mm |
Carrier
9. Track width | 1651 mm | 9. Track width | 1800 mm |