- Home/
- Comparison/
- Crawler-Mounted Loader/
- John Deere 605C vs. Caterpillar 963D
John Deere 605C vs. Caterpillar 963D
6 reasons to buy John Deere 605C:
Operation
Breakout force in folded state | 100 kN and 208.7 kN | 52 % less or 108.7 kN |
Hydraulic system fluid volume | 126 l. and 90 l. | 29 % more or 36 l. |
Static tipping load | 6690 kg and 14969 kg | 55 % less or 8279 kg |
Motor
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Hydraulic system
Lowering time | 3.1 sec and 3.7 sec | 16 % less or 0.6 sec |
Carrier
Specific ground pressure | 52 kPa and 70.9 kPa | 27 % less or 18.9 kPa |
17 reasons to buy Caterpillar 963D:
Sizes
Width to outside of caterpillar track | 2280 mm and 2057 mm | 10 % more or 223 mm |
Clearance | 471 mm and 408 mm | 13 % more or 63 mm |
Ground clearance at full height and unloading | 3155 mm and 2679 mm | 15 % more or 476 mm |
Operation
Maximum speed | 9.5 km/h and 8.9 km/h | 6 % more or 0.6 km/h |
Bucket capacity with top | 2.3 m3 and 1.3 m3 | 43 % more or 1.0 m3 |
Fuel Capacity | 400 l. and 180 l. | 55 % more or 220 l. |
Cooling system fluid volume | 31.5 l. and 24 l. | 24 % more or 7.5 l. |
Engine oil volume | 16.5 l. and 14.7 l. | 11 % more or 1.8 l. |
Each final drive fluid volume | 15 l. and 8.8 l. | 41 % more or 6.2 l. |
Motor
Effective power | 141 kW and 73.8 kW | 48 % more or 67.2 kW |
Cylinders number | 6 and 4 | 33 % more or 2 |
Displacement | 6.6 l. and 4.5 l. | 32 % more or 2.1 l. |
Hydraulic system
Unloading time | 1.3 sec and 1.9 sec | 32 % less or 0.6 sec |
Pump bandwidth | 209 l/min and 115.1 l/min | 45 % more or 93.9 l/min |
Lifting time | 5.7 sec and 6.4 sec | 11 % less or 0.7 sec |
Carrier
Rolling bearings number on either side | 7 and 6 | 14 % more or 1 |
Contact with ground area | 2.8 m2 and 2 m2 | 29 % more or 0.8 m2 |
Neutral reasons:
Sizes
Length to front of caterpillar track | 3859 mm and 4749 mm |
Length with bucket on ground level | 5383 mm and 6584 mm |
Height to cab upper part | 2998 mm and 3335 mm |
Radius at high altitude unloading | 890 mm and 1160 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 10704.8 kg and 20220 kg |
Motor
Manufacturer | John Deere and Caterpillar |
Model | 4045TF278 and C6.6 ACERT |
Hydraulic system
Type of pump | gear type pump and Hydraulic system of Closed Center Load Sensing System (CLSS) |
Overflow valve pressure | 22994 kPa and 27500 kPa |
Carrier
Track shoe width | 457.2 mm and 550 mm |
Track shoes number per side | 38 and 38 |
Caterpillar track length on ground level | 2210 mm and 2542 mm |
Track width | 1600 mm and 1850 mm |
Images
Sizes
1. Length with bucket on ground level | 5383 mm | 1. Length with bucket on ground level | 6584 mm |
2. Width to outside of caterpillar track | 2057 mm | 2. Width to outside of caterpillar track | 2280 mm |
3. Height to cab upper part | 2998 mm | 3. Height to cab upper part | 3335 mm |
5. Clearance | 408 mm | 5. Clearance | 471 mm |
7. Ground clearance at full height and unloading | 2679 mm | 7. Ground clearance at full height and unloading | 3155 mm |
8. Radius at high altitude unloading | 890 mm | 8. Radius at high altitude unloading | 1160 mm |
Carrier
9. Track width | 1600 mm | 9. Track width | 1850 mm |