vs.

      John Deere 655C serie II vs. John Deere 755D

      7 reasons to buy John Deere 655C serie II:

      Operation

      Cooling system fluid volume 68 l. and 20.5 l. 70 % more or 47.5 l.
      Static tipping load 10470 kg and 14332 kg 27 % less or 3862 kg
      Breakout force in folded state 123.1 kN and 164 kN 25 % less or 40.9 kN
      Maximum speed 10.9 km/h and 10 km/h 8 % more or 0.9 km/h

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Carrier

      Track shoes number per side 42 and 38 10 % more or 4
      Specific ground pressure 60 kPa and 78 kPa 23 % less or 18 kPa

      16 reasons to buy John Deere 755D:

      Sizes

      Clearance 458 mm and 395 mm 14 % more or 63 mm
      Ground clearance at full height and unloading 2980 mm and 2827 mm 5 % more or 153 mm
      Width to outside of caterpillar track 2310 mm and 2188 mm 5 % more or 122 mm

      Operation

      Fuel Capacity 360 l. and 260 l. 28 % more or 100 l.
      Engine oil volume 27.5 l. and 20 l. 27 % more or 7.5 l.
      Each final drive fluid volume 17 l. and 8.5 l. 50 % more or 8.5 l.
      Hydraulic system fluid volume 192 l. and 130 l. 32 % more or 62 l.
      Bucket capacity with top 2.4 m3 and 1.8 m3 25 % more or 0.6 m3
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes

      Motor

      Maximum torque 932.8 Nm and 610.1 Nm 35 % more or 322.7 Nm
      Torque measured at 1400 rev / min and 1200 rev / min 14 % more or 200 rev
      Cylinders number 6 and 4 33 % more or 2
      Effective power 135 kW and 96.9 kW 28 % more or 38.1 kW
      Displacement 6.8 l. and 6.7 l. 1 % more or 0.1 l.

      Hydraulic system

      Pump bandwidth 209 l/min and 155.2 l/min 26 % more or 53.8 l/min

      Carrier

      Contact with ground area 2.6 m2 and 2.5 m2 4 % more or 0.1 m2

      Neutral reasons:

      Sizes

      Radius at high altitude unloading 1072 mm and 1210 mm
      Height to cab upper part 3129 mm and 3130 mm
      Length to front of caterpillar track 4339 mm and 4870 mm
      Length with bucket on ground level 6132 mm and 6850 mm

      Operation

      Working weight 15399.5 kg and 20981 kg
      Operating voltage 24 V and 24 V

      Motor

      Aspiration with water-cooling and turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Liebherr and John Deere
      Model D 924 T-EA1 and 6068H

      Hydraulic system

      Type of pump Variable displacement piston pump with load sensing proportional pump flow control and Variable displacement piston pump with load sensing proportional pump flow control
      Overflow valve pressure 25993.2 kPa and 25980 kPa

      Carrier

      Track shoe width 508 mm and 508 mm
      Rolling bearings number on either side 6 and 6
      Caterpillar track length on ground level 2478 mm and 2565 mm
      Track width 1680 mm and 1803 mm

      Images

      Sizes

      5. Clearance 395 mm 5. Clearance 458 mm
      7. Ground clearance at full height and unloading 2827 mm 7. Ground clearance at full height and unloading 2980 mm
      8. Radius at high altitude unloading 1072 mm 8. Radius at high altitude unloading 1210 mm
      1. Length with bucket on ground level 6132 mm 1. Length with bucket on ground level 6850 mm
      2. Width to outside of caterpillar track 2188 mm 2. Width to outside of caterpillar track 2310 mm
      3. Height to cab upper part 3129 mm 3. Height to cab upper part 3130 mm

      Carrier

      9. Track width 1680 mm 9. Track width 1803 mm