vs.

      John Deere 655C serie II vs. Liebherr LR624

      10 reasons to buy John Deere 655C serie II:

      Operation

      Fuel Capacity 260 l. and 243 l. 7 % more or 17 l.
      Cooling system fluid volume 68 l. and 36 l. 47 % more or 32 l.
      Hydraulic system fluid volume 130 l. and 78 l. 40 % more or 52 l.
      Static tipping load 10470 kg and 11863 kg 12 % less or 1393 kg
      Maximum speed 10.9 km/h and 10 km/h 8 % more or 0.9 km/h

      Motor

      Displacement 6.7 l. and 6.4 l. 4 % more or 0.3 l.
      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Hydraulic system

      Lowering time 2.1 sec and 2.7 sec 22 % less or 0.6 sec

      Carrier

      Specific ground pressure 60 kPa and 65.7 kPa 9 % less or 5.7 kPa
      Track shoes number per side 42 and 39 7 % more or 3

      10 reasons to buy Liebherr LR624:

      Sizes

      Width to outside of caterpillar track 2248 mm and 2188 mm 3 % more or 60 mm
      Clearance 430 mm and 395 mm 8 % more or 35 mm
      Ground clearance at full height and unloading 2849 mm and 2827 mm 1 % more or 22 mm

      Operation

      Engine oil volume 30 l. and 20 l. 33 % more or 10 l.
      Each final drive fluid volume 15 l. and 8.5 l. 43 % more or 6.5 l.
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes

      Motor

      Effective power 106.6 kW and 96.9 kW 9 % more or 9.7 kW

      Hydraulic system

      Pump bandwidth 162 l/min and 155.2 l/min 4 % more or 6.8 l/min
      Lifting time 6.3 sec and 6.5 sec 3 % less or 0.2 sec
      Unloading time 1.3 sec and 1.5 sec 13 % less or 0.2 sec

      Neutral reasons:

      Sizes

      Length to front of caterpillar track 4339 mm and 4600 mm
      Length with bucket on ground level 6132 mm and 6337 mm
      Height to cab upper part 3129 mm and 3150 mm
      Radius at high altitude unloading 1072 mm and 1051 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 15399.5 kg and 16908 kg

      Motor

      Manufacturer Liebherr and Liebherr
      Model D 924 T-EA1 and D934 S A6
      Aspiration with water-cooling and turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Cylinders number 4 and 4

      Hydraulic system

      Overflow valve pressure 25993.2 kPa and 25993.2 kPa

      Carrier

      Track width 1680 mm and 1740 mm
      Track shoe width 508 mm and 508 mm
      Rolling bearings number on either side 6 and 6
      Caterpillar track length on ground level 2478 mm and 2483 mm

      Images

      Sizes

      1. Length with bucket on ground level 6132 mm 1. Length with bucket on ground level 6337 mm
      2. Width to outside of caterpillar track 2188 mm 2. Width to outside of caterpillar track 2248 mm
      3. Height to cab upper part 3129 mm 3. Height to cab upper part 3150 mm
      5. Clearance 395 mm 5. Clearance 430 mm
      7. Ground clearance at full height and unloading 2827 mm 7. Ground clearance at full height and unloading 2849 mm
      8. Radius at high altitude unloading 1072 mm 8. Radius at high altitude unloading 1051 mm

      Carrier

      9. Track width 1680 mm 9. Track width 1740 mm