vs.

      John Deere 655C serie II vs. Takeuchi TL120

      14 reasons to buy John Deere 655C serie II:

      Sizes

      Ground clearance at full height and unloading 2827 mm and 2275 mm 20 % more or 552 mm

      Operation

      Engine oil volume 20 l. and 7.4 l. 63 % more or 12.6 l.
      Generator current strength 55 amperes and 40 amperes 27 % more or 15 amperes
      Maximum speed 10.9 km/h and 9.3 km/h 15 % more or 1.6 km/h
      Hydraulic system fluid volume 130 l. and 29 l. 78 % more or 101 l.
      Fuel Capacity 260 l. and 58 l. 78 % more or 202 l.
      Cooling system fluid volume 68 l. and 11 l. 84 % more or 57 l.

      Motor

      Effective power 96.9 kW and 38.5 kW 60 % more or 58.4 kW
      Displacement 6.7 l. and 2 l. 70 % more or 4.7 l.
      Maximum torque 610.1 Nm and 153.6 Nm 75 % more or 456.5 Nm

      Hydraulic system

      Pump bandwidth 155.2 l/min and 57 l/min 63 % more or 98.2 l/min
      Unloading time 1.5 sec and 2.6 sec 42 % less or 1.1 sec
      Lowering time 2.1 sec and 2.4 sec 12 % less or 0.3 sec

      Carrier

      Rolling bearings number on either side 6 and 4 33 % more or 2

      6 reasons to buy Takeuchi TL120:

      Operation

      Static tipping load 1610 kg and 10470 kg 85 % less or 8860 kg
      Breakout force in folded state 21.4 kN and 123.1 kN 83 % less or 101.7 kN

      Motor

      Power measured at 2800 rev / min and 2000 rev / min 29 % more or 800 rev
      Torque measured at 1680 rev / min and 1200 rev / min 29 % more or 480 rev

      Hydraulic system

      Lifting time 3.6 sec and 6.5 sec 45 % less or 2.9 sec

      Carrier

      Specific ground pressure 32.5 kPa and 60 kPa 46 % less or 27.5 kPa

      Neutral reasons:

      Sizes

      Height to cab upper part 3129 mm and 1970 mm
      Radius at high altitude unloading 1072 mm and 590 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 15399.5 kg and 2755 kg

      Motor

      Model D 924 T-EA1 and 4TNV84T
      Manufacturer Liebherr and Yanmar
      Cylinders number 4 and 4

      Hydraulic system

      Overflow valve pressure 25993.2 kPa and 2060 kPa

      Carrier

      Track shoe width 508 mm and 300 mm
      Caterpillar track length on ground level 2478 mm and 1240 mm

      Images

      Sizes

      3. Height to cab upper part 3129 mm 3. Height to cab upper part 1970 mm
      7. Ground clearance at full height and unloading 2827 mm 7. Ground clearance at full height and unloading 2275 mm
      8. Radius at high altitude unloading 1072 mm 8. Radius at high altitude unloading 590 mm