- Home/
- Comparison/
- Tracked Tractor/
- Case 1650K LGP vs. John Deere 950J
Case 1650K LGP vs. John Deere 950J
6 reasons to buy Case 1650K LGP:
Motor
Power measured at | 2200 rev / min and 1600 rev / min | 27 % more or 600 rev |
Gear box
Maximum forward speed | 11 km/h and 10.9 km/h | 1 % more or 0.1 km/h |
Maximum reverse gear | 13 km/h and 10.9 km/h | 16 % more or 2.1 km/h |
Carrier
Specific ground pressure | 34.5 kPa and 69.6 kPa | 50 % less or 35.1 kPa |
Track shoes number per side | 48 and 40 | 17 % more or 8 |
Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
14 reasons to buy John Deere 950J:
Standard blade
Volume | 7.2 m3 and 3.3 m3 | 54 % more or 3.9 m3 |
Cut depth | 511 mm and 480 mm | 6 % more or 31 mm |
Sizes
Clearance | 533 mm and 370 mm | 31 % more or 163 mm |
Operation
Engine oil volume | 43 l. and 15.1 l. | 65 % more or 27.9 l. |
Hydraulic system fluid volume | 189 l. and 62 l. | 67 % more or 127 l. |
Final drive fluid volume | 19.5 l. and 17.9 l. | 8 % more or 1.6 l. |
Generator current strength | 80 amperes and 70 amperes | 12 % more or 10 amperes |
Fuel Capacity | 534 l. and 269.9 l. | 49 % more or 264.1 l. |
Cooling system fluid volume | 62 l. and 34.6 l. | 44 % more or 27.4 l. |
Motor
Effective power | 184 kW and 104 kW | 43 % more or 80 kW |
Maximum torque | 1270 Nm and 649.4 Nm | 49 % more or 620.6 Nm |
Displacement | 10.5 l. and 5.9 l. | 44 % more or 4.6 l. |
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Hydraulic system
Pump bandwidth | 257 l/min and 120 l/min | 53 % more or 137 l/min |
Neutral reasons:
Standard blade
Width | 3980 mm and 3700 mm |
Height | 1059 mm and 1550 mm |
Sizes
Length with blade | 5318 mm and 6050 mm |
Width between caterpillar tracks | 2937 mm and 2590 mm |
Height to cab upper part | 3073 mm and 3430 mm |
Caterpillar track length on ground level | 2990 mm and 2997 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 16193.2 kg and 25565 kg |
Motor
Manufacturer | Cummins and Liebherr |
Cylinders number | 6 and 6 |
Model | 6BTAA-5.9 and D 936-L A6 |
Hydraulic system
Type of pump | piston pump and alternating axial piston |
Gear box
Transmission type | powershift and Hydrostatic with direct drive |
Carrier
Standard shoe size | 800 mm and 610 mm |
Caterpillar track pitch | 176 mm and 216 mm |
Track width | 2140 mm and 1981 mm |
Images
Sizes
1. Length with blade | 5318 mm | 1. Length with blade | 6050 mm |
2. Width between caterpillar tracks | 2937 mm | 2. Width between caterpillar tracks | 2590 mm |
3. Height to cab upper part | 3073 mm | 3. Height to cab upper part | 3430 mm |
4. Caterpillar track length on ground level | 2990 mm | 4. Caterpillar track length on ground level | 2997 mm |
5. Clearance | 370 mm | 5. Clearance | 533 mm |
Carrier
8. Standard shoe size | 800 mm | 8. Standard shoe size | 610 mm |
7. Track width | 2140 mm | 7. Track width | 1981 mm |