- Home/
- Comparison/
- Tracked Tractor/
- Case 650L LT vs. John Deere 650H XLT
Case 650L LT vs. John Deere 650H XLT
10 reasons to buy Case 650L LT:
Standard blade
Blade angle in both directions | 25 degrees and 22.2 degrees | 11 % more or 2.8 degrees |
Cut depth | 531 mm and 500 mm | 6 % more or 31 mm |
Sizes
Clearance | 366 mm and 363 mm | 1 % more or 3 mm |
Operation
Cooling system fluid volume | 21.4 l. and 16 l. | 25 % more or 5.4 l. |
Hydraulic system fluid volume | 62.5 l. and 32.2 l. | 48 % more or 30.3 l. |
Final drive fluid volume | 14.2 l. and 6.6 l. | 54 % more or 7.6 l. |
Motor
Torque measured at | 1400 rev / min and 1200 rev / min | 14 % more or 200 rev |
Hydraulic system
Pump bandwidth | 76.8 l/min and 56.8 l/min | 26 % more or 20.0 l/min |
Gear box
Maximum forward speed | 8.9 km/h and 8 km/h | 10 % more or 0.9 km/h |
Maximum reverse gear | 8.9 km/h and 8 km/h | 10 % more or 0.9 km/h |
10 reasons to buy John Deere 650H XLT:
Standard blade
Volume | 2 m3 and 1.3 m3 | 35 % more or 0.7 m3 |
Operation
Fuel Capacity | 178 l. and 155.2 l. | 13 % more or 22.8 l. |
Engine oil volume | 14 l. and 12.3 l. | 12 % more or 1.7 l. |
Motor
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Maximum torque | 428.4 Nm and 400 Nm | 7 % more or 28.4 Nm |
Effective power | 67.1 kW and 55.2 kW | 18 % more or 11.9 kW |
Carrier
Specific ground pressure | 38.5 kPa and 42.7 kPa | 10 % less or 4.2 kPa |
Contact with ground area | 2.1 m2 and 1.7 m2 | 19 % more or 0.4 m2 |
Track shoes number per side | 40 and 39 | 2 % more or 1 |
Rolling bearings number on either side | 7 and 6 | 14 % more or 1 |
Neutral reasons:
Standard blade
Width | 2438 mm and 2667 mm |
Height | 841 mm and 933 mm |
Sizes
Width between caterpillar tracks | 1828 mm and 2006 mm |
Height to cab upper part | 2639 mm and 2768 mm |
Caterpillar track length on ground level | 2120 mm and 2337 mm |
Operation
Operating voltage | 12 V and 12 V |
Generator current strength | 65 amperes and 65 amperes |
Working weight | 7370.9 kg and 8437 kg |
Motor
Model | 445TA/EHA and 4045T |
Displacement | 4.5 l. and 4.5 l. |
Cylinders number | 4 and 4 |
Manufacturer | Case and John Deere |
Hydraulic system
Overflow valve pressure | 20856.6 kPa and 20685 kPa |
Gear box
Transmission type | Hydro-Static Transmission and Electronically controlled hydrostatic drive with a split power flow |
Carrier
Standard shoe size | 406.4 mm and 457 mm |
Images
Sizes
3. Height to cab upper part | 2639 mm | 3. Height to cab upper part | 2768 mm |
4. Caterpillar track length on ground level | 2120 mm | 4. Caterpillar track length on ground level | 2337 mm |
5. Clearance | 366 mm | 5. Clearance | 363 mm |
2. Width between caterpillar tracks | 1828 mm | 2. Width between caterpillar tracks | 2006 mm |
Carrier
8. Standard shoe size | 406.4 mm | 8. Standard shoe size | 457 mm |