- Home/
- Comparison/
- Tracked Tractor/
- Caterpillar D3C LGP serie III vs. New Holland D95 XLT
Caterpillar D3C LGP serie III vs. New Holland D95 XLT
3 reasons to buy Caterpillar D3C LGP serie III:
Motor
Power measured at | 2400 rev / min and 2000 rev / min | 17 % more or 400 rev |
Gear box
Maximum forward speed | 10.8 km/h and 9.7 km/h | 10 % more or 1.1 km/h |
Carrier
Specific ground pressure | 28.6 kPa and 40.1 kPa | 29 % less or 11.5 kPa |
16 reasons to buy New Holland D95 XLT:
Standard blade
Volume | 1.7 m3 and 1.3 m3 | 24 % more or 0.4 m3 |
Cut depth | 483 mm and 424 mm | 12 % more or 59 mm |
Sizes
Clearance | 379 mm and 300 mm | 21 % more or 79 mm |
Operation
Fuel Capacity | 189.3 l. and 121 l. | 36 % more or 68.3 l. |
Hydraulic system fluid volume | 75.7 l. and 56.8 l. | 25 % more or 18.9 l. |
Final drive fluid volume | 14.2 l. and 13.2 l. | 7 % more or 1.0 l. |
Cooling system fluid volume | 18.9 l. and 9 l. | 52 % more or 9.9 l. |
Engine oil volume | 15.8 l. and 13 l. | 18 % more or 2.8 l. |
Generator current strength | 65 amperes and 55 amperes | 15 % more or 10 amperes |
Motor
Full power | 73.8 kW and 58.2 kW | 21 % more or 15.6 kW |
Effective power | 71.6 kW and 52.9 kW | 26 % more or 18.7 kW |
Displacement | 6.7 l. and 5 l. | 25 % more or 1.7 l. |
Hydraulic system
Pump bandwidth | 76.8 l/min and 54.1 l/min | 30 % more or 22.7 l/min |
Gear box
Forward gears number | 10 and 3 | 70 % more or 7 |
Carrier
Rolling bearings number on either side | 7 and 6 | 14 % more or 1 |
Track shoes number per side | 40 and 39 | 2 % more or 1 |
Neutral reasons:
Standard blade
Width | 3145 mm and 2640 mm |
Height | 749 mm and 910 mm |
Blade angle in both directions | 25 degrees and 25 degrees |
Sizes
Length without blade | 2981 mm and 3263 mm |
Length with blade | 4018 mm and 4258 mm |
Width between caterpillar tracks | 1651 mm and 2590 mm |
Height to cab upper part | 2664 mm and 2773 mm |
Caterpillar track length on ground level | 2055 mm and 2360 mm |
Operation
Operating voltage | 12 V and 12 V |
Working weight | 7639.4 kg and 8891 kg |
Motor
Manufacturer | Caterpillar and New Holland |
Model | 3046 and 667T/M2 |
Aspiration | natural aspiration and natural aspiration |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | gear type pump and gear type pump |
Gear box
Transmission type | powershift transmission and Hydro-Static Transmission |
Carrier
Track width | 1651 mm and 1570 mm |
Standard shoe size | 635 mm and 460 mm |
Images
Sizes
1. Length with blade | 4018 mm | 1. Length with blade | 4258 mm |
2. Width between caterpillar tracks | 1651 mm | 2. Width between caterpillar tracks | 2590 mm |
3. Height to cab upper part | 2664 mm | 3. Height to cab upper part | 2773 mm |
4. Caterpillar track length on ground level | 2055 mm | 4. Caterpillar track length on ground level | 2360 mm |
5. Clearance | 300 mm | 5. Clearance | 379 mm |
6. Length without blade | 2981 mm | 6. Length without blade | 3263 mm |
Carrier
7. Track width | 1651 mm | 7. Track width | 1570 mm |
8. Standard shoe size | 635 mm | 8. Standard shoe size | 460 mm |