vs.

      Dressta TD10M LGP vs. Dressta TD8M

      12 reasons to buy Dressta TD10M LGP:

      Standard blade

      Volume 2 m3 and 1.7 m3 15 % more or 0.3 m3

      Sizes

      Clearance 381 mm and 323 mm 15 % more or 58 mm

      Operation

      Final drive fluid volume 15.1 l. and 9.5 l. 37 % more or 5.6 l.

      Motor

      Full power 82 kW and 69 kW 16 % more or 13 kW
      Effective power 76 kW and 63 kW 17 % more or 13 kW
      Power measured at 2500 rev / min and 2220 rev / min 11 % more or 280 rev

      Hydraulic system

      Pump bandwidth 75.2 l/min and 69.6 l/min 7 % more or 5.6 l/min

      Gear box

      Maximum forward speed 10 km/h and 8.9 km/h 11 % more or 1.1 km/h
      Maximum reverse gear 11.9 km/h and 10.5 km/h 12 % more or 1.4 km/h

      Carrier

      Specific ground pressure 32.4 kPa and 48.2 kPa 33 % less or 15.8 kPa
      Contact with ground area 2.7 m2 and 1.6 m2 41 % more or 1.1 m2
      Track shoes number per side 39 and 37 5 % more or 2

      1 reasons to buy Dressta TD8M:

      Standard blade

      Cut depth 363 mm and 305 mm 16 % more or 58 mm

      Neutral reasons:

      Standard blade

      Width 2820 mm and 2620 mm
      Height 990 mm and 940 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Length without blade 4800 mm and 4780 mm
      Height to cab upper part 2720 mm and 2660 mm

      Operation

      Hydraulic system fluid volume 70 l. and 70 l.
      Power unit fluid volume 70 l. and 70 l.
      Operating voltage 12 V and 12 V
      Working weight 8910 kg and 7874 kg
      Fuel Capacity 170 l. and 170 l.
      Cooling system fluid volume 24.9 l. and 24.9 l.
      Engine oil volume 10.4 l. and 10.4 l.

      Motor

      Manufacturer Cummins and Cummins
      Model QSB4.5 and B4.5
      Displacement 4.5 l. and 4.5 l.
      Torque measured at 1500 rev / min and 1500 rev / min
      Aspiration 4-stroke diesel engine turbocharging, ECM, direct run, direct injection and 4-stroke, turbocharged diesel engine, direct run, direct injection
      Cylinders number 4 and 4

      Hydraulic system

      Overflow valve pressure 15512 kPa and 15512 kPa
      Type of pump Pump with double gear and Pump with double gear

      Gear box

      Transmission type Powershift of modular camshaft, of electrohydraulic action and Powershift of modular camshaft, of electrohydraulic action
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 610 mm and 381 mm
      Rolling bearings number on either side 6 and 6
      Caterpillar track pitch 165 mm and 165 mm

      Images

      Sizes

      3. Height to cab upper part 2720 mm 3. Height to cab upper part 2660 mm
      5. Clearance 381 mm 5. Clearance 323 mm
      6. Length without blade 4800 mm 6. Length without blade 4780 mm

      Carrier

      8. Standard shoe size 610 mm 8. Standard shoe size 381 mm