vs.

      Dressta TD20M LT vs. Case 1150H LGP

      15 reasons to buy Dressta TD20M LT:

      Standard blade

      Cut depth 700 mm and 483 mm 31 % more or 217 mm
      Volume 8.5 m3 and 3 m3 65 % more or 5.5 m3
      Blade angle in both directions 25 degrees and 17 degrees 32 % more or 8 degrees

      Sizes

      Clearance 460 mm and 328 mm 29 % more or 132 mm

      Operation

      Fuel Capacity 490 l. and 212 l. 57 % more or 278 l.
      Cooling system fluid volume 50 l. and 27.4 l. 45 % more or 22.6 l.
      Engine oil volume 23 l. and 15.1 l. 34 % more or 7.9 l.
      Hydraulic system fluid volume 133 l. and 64.4 l. 52 % more or 68.6 l.
      Final drive fluid volume 38 l. and 7.6 l. 80 % more or 30.4 l.

      Motor

      Effective power 179 kW and 88.7 kW 50 % more or 90.3 kW
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Displacement 8.3 l. and 5.9 l. 29 % more or 2.4 l.
      Full power 194 kW and 92.5 kW 52 % more or 101.5 kW

      Gear box

      Maximum forward speed 10.6 km/h and 9.3 km/h 12 % more or 1.3 km/h
      Maximum reverse gear 12.5 km/h and 11.1 km/h 11 % more or 1.4 km/h

      7 reasons to buy Case 1150H LGP:

      Operation

      Generator current strength 65 amperes and 50 amperes 23 % more or 15 amperes

      Motor

      Torque measured at 1600 rev / min and 1500 rev / min 6 % more or 100 rev

      Hydraulic system

      Pump bandwidth 132.1 l/min and 2.3 l/min 98 % more or 129.8 l/min

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Reverse gears number 4 and 3 25 % more or 1

      Carrier

      Track shoes number per side 43 and 42 2 % more or 1
      Contact with ground area 4.2 m2 and 3.4 m2 19 % more or 0.8 m2

      Neutral reasons:

      Standard blade

      Width 3860 mm and 3150 mm
      Height 1.6 mm and 1118 mm

      Sizes

      Width between caterpillar tracks 2890 mm and 2740 mm
      Height to cab upper part 3570 mm and 3020 mm

      Operation

      Working weight 24760 kg and 12274.2 kg
      Operating voltage 12 V and 12 V

      Motor

      Cylinders number 6 and 6
      Manufacturer Cummins and Case
      Model QSC8.3 and 6T-590

      Hydraulic system

      Overflow valve pressure 9 lb / sq. inch and 2000 lb / sq. inch

      Gear box

      Transmission type Powershift of modular camshaft, of electrohydraulic action and Case modulated powershift with full mesh

      Carrier

      Standard shoe size 560 mm and 863.6 mm
      Rolling bearings number on either side 7 and 7

      Images

      Sizes

      2. Width between caterpillar tracks 2890 mm 2. Width between caterpillar tracks 2740 mm
      3. Height to cab upper part 3570 mm 3. Height to cab upper part 3020 mm
      5. Clearance 460 mm 5. Clearance 328 mm

      Carrier

      8. Standard shoe size 560 mm 8. Standard shoe size 863.6 mm