- Home/
- Comparison/
- Tracked Tractor/
- Dressta TD25M vs. John Deere 850J WH LGP
Dressta TD25M vs. John Deere 850J WH LGP
12 reasons to buy Dressta TD25M:
Standard blade
Volume | 11.5 m3 and 9.9 m3 | 14 % more or 1.6 m3 |
Blade angle in both directions | 25 degrees and 23.8 degrees | 5 % more or 1.2 degrees |
Cut depth | 1700 mm and 704 mm | 59 % more or 996 mm |
Operation
Power unit fluid volume | 240 l. and 106 l. | 56 % more or 134 l. |
Fuel Capacity | 825 l. and 371 l. | 55 % more or 454 l. |
Cooling system fluid volume | 56 l. and 35 l. | 37 % more or 21 l. |
Engine oil volume | 49 l. and 26 l. | 47 % more or 23 l. |
Hydraulic system fluid volume | 130 l. and 106 l. | 18 % more or 24 l. |
Motor
Effective power | 246 kW and 151 kW | 39 % more or 95 kW |
Displacement | 15 l. and 9 l. | 40 % more or 6 l. |
Gear box
Maximum forward speed | 10.3 km/h and 10.1 km/h | 2 % more or 0.2 km/h |
Maximum reverse gear | 12.3 km/h and 10.1 km/h | 18 % more or 2.2 km/h |
7 reasons to buy John Deere 850J WH LGP:
Operation
Generator current strength | 80 amperes and 50 amperes | 37 % more or 30 amperes |
Motor
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Hydraulic system
Pump bandwidth | 174 l/min and 1.7 l/min | 99 % more or 172.3 l/min |
Carrier
Specific ground pressure | 35.5 kPa and 100 kPa | 64 % less or 64.5 kPa |
Contact with ground area | 6 m2 and 3.5 m2 | 42 % more or 2.5 m2 |
Track shoes number per side | 45 and 38 | 16 % more or 7 |
Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
Neutral reasons:
Standard blade
Height | 1760 mm and 1830 mm |
Width | 4350 mm and 4267 mm |
Sizes
Width between caterpillar tracks | 3210 mm and 3302 mm |
Height to cab upper part | 3800 mm and 3175 mm |
Operation
Operating voltage | 12 V and 24 V |
Working weight | 36230 kg and 22184 kg |
Motor
Manufacturer | Cummins and John Deere |
Model | QSX15 and 6090HT |
Power measured at | 1800 rev / min and 1800 rev / min |
Cylinders number | 6 and 6 |
Aspiration | Turbocharger with charge air cooling and Turbocharging with subsequent air cooling (by a cooling radiator) |
Hydraulic system
Type of pump | Numerous vane pumps, actuated with torque converter and piston pump |
Overflow valve pressure | 1 lb / sq. inch and 3625 lb / sq. inch |
Gear box
Transmission type | Powershift of modular camshaft, of electrohydraulic action and Hydrostatic with direct drive |
Carrier
Standard shoe size | 560 mm and 914 mm |
Images
Sizes
2. Width between caterpillar tracks | 3210 mm | 2. Width between caterpillar tracks | 3302 mm |
3. Height to cab upper part | 3800 mm | 3. Height to cab upper part | 3175 mm |
Carrier
8. Standard shoe size | 560 mm | 8. Standard shoe size | 914 mm |