vs.

      Dressta TD8M LGP vs. John Deere 450H

      14 reasons to buy Dressta TD8M LGP:

      Standard blade

      Volume 1.5 m3 and 1.4 m3 7 % more or 0.1 m3

      Operation

      Final drive fluid volume 9.5 l. and 6.6 l. 31 % more or 2.9 l.
      Fuel Capacity 170 l. and 136 l. 20 % more or 34 l.
      Cooling system fluid volume 24.9 l. and 16 l. 36 % more or 8.9 l.
      Hydraulic system fluid volume 70 l. and 32.2 l. 54 % more or 37.8 l.
      Power unit fluid volume 70 l. and 42.7 l. 39 % more or 27.3 l.

      Motor

      Torque measured at 1500 rev / min and 1200 rev / min 20 % more or 300 rev
      Full power 69 kW and 54.4 kW 21 % more or 14.6 kW
      Effective power 63 kW and 52.2 kW 17 % more or 10.8 kW

      Hydraulic system

      Pump bandwidth 69.6 l/min and 56.8 l/min 18 % more or 12.8 l/min

      Gear box

      Maximum forward speed 8.9 km/h and 8 km/h 10 % more or 0.9 km/h
      Maximum reverse gear 10.5 km/h and 8 km/h 24 % more or 2.5 km/h

      Carrier

      Specific ground pressure 31.7 kPa and 42.1 kPa 25 % less or 10.4 kPa
      Rolling bearings number on either side 6 and 5 17 % more or 1

      5 reasons to buy John Deere 450H:

      Standard blade

      Blade angle in both directions 25.4 degrees and 25 degrees 2 % more or 0.4 degrees
      Cut depth 528 mm and 363 mm 31 % more or 165 mm

      Sizes

      Clearance 346 mm and 323 mm 7 % more or 23 mm

      Operation

      Engine oil volume 14 l. and 10.4 l. 26 % more or 3.6 l.

      Carrier

      Contact with ground area 15897 m2 and 2.5 m2 100 % more or 15894.5 m2

      Neutral reasons:

      Standard blade

      Width 2820 mm and 2286 mm
      Height 840 mm and 826 mm

      Sizes

      Height to cab upper part 2660 mm and 2590 mm
      Length without blade 4780 mm and 3937 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 8210 kg and 6818 kg

      Motor

      Displacement 4.5 l. and 4.5 l.
      Manufacturer Cummins and John Deere
      Model B4.5 and 4045D
      Cylinders number 4 and 4
      Aspiration turbocharging, direct run, direct injection and natural aspiration
      Power measured at 2200 rev / min and 2200 rev / min

      Hydraulic system

      Type of pump Pump with double gear and gear type pump
      Overflow valve pressure 15512 kPa and 20685 kPa

      Gear box

      Transmission type Powershift of modular camshaft, of electrohydraulic action and Electronically controlled hydrostatic drive with a split power flow

      Carrier

      Standard shoe size 610 mm and 406 mm
      Track shoes number per side 37 and 37
      Caterpillar track pitch 165 mm and 159.8 mm

      Images

      Sizes

      3. Height to cab upper part 2660 mm 3. Height to cab upper part 2590 mm
      5. Clearance 323 mm 5. Clearance 346 mm
      6. Length without blade 4780 mm 6. Length without blade 3937 mm

      Carrier

      8. Standard shoe size 610 mm 8. Standard shoe size 406 mm