vs.

      John Deere 1050C vs. New Holland D150 XLT

      10 reasons to buy John Deere 1050C:

      Standard blade

      Volume 9.5 m3 and 3.2 m3 66 % more or 6.3 m3
      Cut depth 570 mm and 490 mm 14 % more or 80 mm

      Sizes

      Clearance 625 mm and 370 mm 41 % more or 255 mm

      Operation

      Cooling system fluid volume 68 l. and 25 l. 63 % more or 43 l.
      Engine oil volume 24 l. and 14.2 l. 41 % more or 9.8 l.
      Hydraulic system fluid volume 210 l. and 63 l. 70 % more or 147 l.
      Fuel Capacity 610 l. and 270 l. 56 % more or 340 l.

      Motor

      Effective power 241.6 kW and 104.4 kW 57 % more or 137.2 kW
      Maximum torque 1530.7 Nm and 650 Nm 58 % more or 880.7 Nm
      Displacement 13 l. and 5.9 l. 55 % more or 7.1 l.

      9 reasons to buy New Holland D150 XLT:

      Operation

      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Final drive fluid volume 26 l. and 21 l. 19 % more or 5 l.

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev

      Gear box

      Maximum reverse gear 13 km/h and 11 km/h 15 % more or 2 km/h

      Carrier

      Rolling bearings number on either side 8 and 7 12 % more or 1
      Specific ground pressure 51 kPa and 93 kPa 45 % less or 42 kPa
      Contact with ground area 29.9 m2 and 3.6 m2 88 % more or 26.3 m2
      Track shoes number per side 48 and 44 8 % more or 4

      Neutral reasons:

      Standard blade

      Width 4200 mm and 3200 mm
      Height 1650 mm and 1100 mm

      Sizes

      Length without blade 4885 mm and 4010 mm
      Length with blade 6415 mm and 5315 mm
      Width between caterpillar tracks 2740 mm and 2400 mm
      Height to cab upper part 3640 mm and 3080 mm
      Caterpillar track length on ground level 3174 mm and 2985 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 33560 kg and 15680 kg

      Motor

      Manufacturer Liebherr and Cummins
      Model D 9406 TI-E and 6BTAA5.9
      Aspiration Turbocharging with intercooler and Turbocharging with subsequent air cooling (by a cooling radiator)
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Variable displacement piston pump with load sensing proportional pump flow control and variable displacement piston pump
      Overflow valve pressure 20000 kPa and 19000 kPa

      Gear box

      Transmission type Electronically controlled closed loop hydrostatic drive with a split power flow and Powershift, camshaft, full mesh
      Forward gears number 3 and 3
      Reverse gears number 3 and 3
      Maximum forward speed 11 km/h and 11 km/h

      Carrier

      Track width 2180 mm and 1900 mm
      Standard shoe size 560 mm and 500 mm

      Images

      Sizes

      1. Length with blade 6415 mm 1. Length with blade 5315 mm
      2. Width between caterpillar tracks 2740 mm 2. Width between caterpillar tracks 2400 mm
      3. Height to cab upper part 3640 mm 3. Height to cab upper part 3080 mm
      4. Caterpillar track length on ground level 3174 mm 4. Caterpillar track length on ground level 2985 mm
      5. Clearance 625 mm 5. Clearance 370 mm
      6. Length without blade 4885 mm 6. Length without blade 4010 mm

      Carrier

      7. Track width 2180 mm 7. Track width 1900 mm
      8. Standard shoe size 560 mm 8. Standard shoe size 500 mm