- Home/
- Comparison/
- Tracked Tractor/
- John Deere 650G LT vs. Caterpillar D6D
John Deere 650G LT vs. Caterpillar D6D
3 reasons to buy John Deere 650G LT:
Standard blade
Blade angle in both directions | 25 degrees and 12 degrees | 52 % more or 13 degrees |
Gear box
Forward gears number | 4 and 3 | 25 % more or 1 |
Reverse gears number | 4 and 3 | 25 % more or 1 |
9 reasons to buy Caterpillar D6D:
Standard blade
Cut depth | 472 mm and 420 mm | 11 % more or 52 mm |
Volume | 3.3 m3 and 1.9 m3 | 42 % more or 1.4 m3 |
Operation
Hydraulic system fluid volume | 45.8 l. and 9.5 l. | 79 % more or 36.3 l. |
Fuel Capacity | 238 l. and 155.2 l. | 35 % more or 82.8 l. |
Motor
Full power | 104 kW and 74 kW | 29 % more or 30 kW |
Displacement | 10.5 l. and 4.5 l. | 57 % more or 6.0 l. |
Hydraulic system
Pump bandwidth | 166 l/min and 64 l/min | 61 % more or 102 l/min |
Gear box
Maximum forward speed | 10.8 km/h and 9 km/h | 17 % more or 1.8 km/h |
Maximum reverse gear | 12.9 km/h and 10 km/h | 22 % more or 2.9 km/h |
Neutral reasons:
Standard blade
Width | 2667 mm and 3200 mm |
Height | 898 mm and 1128 mm |
Sizes
Length without blade | 4070 mm and 3200 mm |
Height to cab upper part | 2794 mm and 2900 mm |
Motor
Model | 4045D and 3306 |
Aspiration | natural aspiration, direct drive and turbocharging |
Hydraulic system
Overflow valve pressure | 18961 kPa and 15513.2 kPa |
Gear box
Transmission type | Powershift, dual shifting with direct drive and powershift |
Images
Sizes
3. Height to cab upper part | 2794 mm | 3. Height to cab upper part | 2900 mm |
6. Length without blade | 4070 mm | 6. Length without blade | 3200 mm |