- Home/
- Comparison/
- Tracked Tractor/
- John Deere 700H LGP vs. Caterpillar D4C serie III
John Deere 700H LGP vs. Caterpillar D4C serie III
13 reasons to buy John Deere 700H LGP:
Standard blade
Volume | 2.9 m3 and 1.7 m3 | 41 % more or 1.2 m3 |
Cut depth | 541 mm and 448 mm | 17 % more or 93 mm |
Sizes
Clearance | 381 mm and 374 mm | 2 % more or 7 mm |
Operation
Engine oil volume | 19 l. and 13 l. | 32 % more or 6 l. |
Fuel Capacity | 227 l. and 157 l. | 31 % more or 70 l. |
Power unit fluid volume | 65 l. and 28.2 l. | 57 % more or 36.8 l. |
Motor
Full power | 91.7 kW and 65.6 kW | 28 % more or 26.1 kW |
Effective power | 85.8 kW and 60.4 kW | 30 % more or 25.4 kW |
Displacement | 6.8 l. and 5 l. | 26 % more or 1.8 l. |
Hydraulic system
Pump bandwidth | 95 l/min and 66.6 l/min | 30 % more or 28.4 l/min |
Carrier
Contact with ground area | 2.7 m2 and 1.7 m2 | 37 % more or 1.0 m2 |
Track shoes number per side | 42 and 39 | 7 % more or 3 |
Rolling bearings number on either side | 7 and 6 | 14 % more or 1 |
6 reasons to buy Caterpillar D4C serie III:
Operation
Hydraulic system fluid volume | 56.8 l. and 51 l. | 10 % more or 5.8 l. |
Final drive fluid volume | 14.7 l. and 13 l. | 12 % more or 1.7 l. |
Motor
Power measured at | 2400 rev / min and 2100 rev / min | 12 % more or 300 rev |
Gear box
Maximum forward speed | 11.1 km/h and 8.9 km/h | 20 % more or 2.2 km/h |
Maximum reverse gear | 11.9 km/h and 8.9 km/h | 25 % more or 3.0 km/h |
Carrier
Specific ground pressure | 42.7 kPa and 45 kPa | 5 % less or 2.3 kPa |
Neutral reasons:
Standard blade
Width | 3353 mm and 2740 mm |
Height | 988 mm and 928 mm |
Blade angle in both directions | 25 degrees and 25 degrees |
Sizes
Length without blade | 4765 mm and 2957 mm |
Width between caterpillar tracks | 2743 mm and 1905 mm |
Height to cab upper part | 2985 mm and 2728 mm |
Caterpillar track length on ground level | 2600 mm and 2055 mm |
Operation
Cooling system fluid volume | 21 l. and 21 l. |
Operating voltage | 24 V and 12 V |
Generator current strength | 55 amperes and 55 amperes |
Working weight | 12653 kg and 7266.1 kg |
Motor
Manufacturer | John Deere and Caterpillar |
Model | PowerTech 6068T and 3046 |
Cylinders number | 6 and 6 |
Aspiration | turbocharging and natural aspiration |
Hydraulic system
Type of pump | Gear pump with fixed displacement and gear type pump |
Overflow valve pressure | 22064 kPa and 17236.9 kPa |
Gear box
Transmission type | Electronically controlled hydrostatic drive with a split power flow and powershift |
Images
Sizes
2. Width between caterpillar tracks | 2743 mm | 2. Width between caterpillar tracks | 1905 mm |
3. Height to cab upper part | 2985 mm | 3. Height to cab upper part | 2728 mm |
4. Caterpillar track length on ground level | 2600 mm | 4. Caterpillar track length on ground level | 2055 mm |
5. Clearance | 381 mm | 5. Clearance | 374 mm |
6. Length without blade | 4765 mm | 6. Length without blade | 2957 mm |