vs.

      John Deere 700H LGP vs. Caterpillar D7H

      5 reasons to buy John Deere 700H LGP:

      Standard blade

      Cut depth 541 mm and 498 mm 8 % more or 43 mm

      Operation

      Final drive fluid volume 13 l. and 9.6 l. 26 % more or 3.4 l.
      Generator current strength 55 amperes and 35 amperes 36 % more or 20 amperes

      Carrier

      Track shoes number per side 42 and 40 5 % more or 2
      Specific ground pressure 45 kPa and 76.2 kPa 41 % less or 31.2 kPa

      12 reasons to buy Caterpillar D7H:

      Standard blade

      Volume 4.5 m3 and 2.9 m3 36 % more or 1.6 m3

      Sizes

      Clearance 403.5 mm and 381 mm 6 % more or 22.5 mm

      Operation

      Fuel Capacity 488 l. and 227 l. 53 % more or 261 l.
      Cooling system fluid volume 52.4 l. and 21 l. 60 % more or 31.4 l.
      Hydraulic system fluid volume 115 l. and 51 l. 56 % more or 64 l.

      Motor

      Full power 172.3 kW and 91.7 kW 47 % more or 80.6 kW
      Effective power 160.3 kW and 85.8 kW 46 % more or 74.5 kW
      Displacement 10.5 l. and 6.8 l. 35 % more or 3.7 l.

      Hydraulic system

      Pump bandwidth 175 l/min and 95 l/min 46 % more or 80 l/min

      Gear box

      Maximum forward speed 11.9 km/h and 8.9 km/h 25 % more or 3.0 km/h
      Maximum reverse gear 14.3 km/h and 8.9 km/h 38 % more or 5.4 km/h

      Carrier

      Contact with ground area 2.9 m2 and 2.7 m2 7 % more or 0.2 m2

      Neutral reasons:

      Standard blade

      Width 3353 mm and 3813 mm
      Height 988 mm and 1276 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Length without blade 4765 mm and 4619 mm
      Height to cab upper part 2985 mm and 3336 mm
      Caterpillar track length on ground level 2600 mm and 2896 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 12653 kg and 23647.6 kg

      Motor

      Cylinders number 6 and 6
      Aspiration turbocharging and turbocharging
      Manufacturer John Deere and Caterpillar
      Model PowerTech 6068T and 3306
      Power measured at 2100 rev / min and 2100 rev / min

      Hydraulic system

      Overflow valve pressure 22064 kPa and 22752.7 kPa

      Gear box

      Transmission type Electronically controlled hydrostatic drive with a split power flow and planetary powershift transmission

      Carrier

      Rolling bearings number on either side 7 and 7

      Images

      Sizes

      3. Height to cab upper part 2985 mm 3. Height to cab upper part 3336 mm
      4. Caterpillar track length on ground level 2600 mm 4. Caterpillar track length on ground level 2896 mm
      5. Clearance 381 mm 5. Clearance 403.5 mm
      6. Length without blade 4765 mm 6. Length without blade 4619 mm