vs.

      John Deere 700H XLT vs. Case 650L LT

      15 reasons to buy John Deere 700H XLT:

      Standard blade

      Volume 2.6 m3 and 1.3 m3 50 % more or 1.3 m3
      Cut depth 541 mm and 531 mm 2 % more or 10 mm

      Sizes

      Clearance 381 mm and 366 mm 4 % more or 15 mm

      Operation

      Fuel Capacity 227 l. and 155.2 l. 32 % more or 71.8 l.
      Engine oil volume 19 l. and 12.3 l. 35 % more or 6.7 l.

      Motor

      Full power 91.7 kW and 60 kW 35 % more or 31.7 kW
      Effective power 85.8 kW and 55.2 kW 36 % more or 30.6 kW
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Maximum torque 555.9 Nm and 400 Nm 28 % more or 155.9 Nm
      Displacement 6.8 l. and 4.5 l. 34 % more or 2.3 l.
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 95 l/min and 76.8 l/min 19 % more or 18.2 l/min

      Carrier

      Contact with ground area 2.7 m2 and 1.7 m2 37 % more or 1.0 m2
      Track shoes number per side 42 and 39 7 % more or 3
      Rolling bearings number on either side 7 and 6 14 % more or 1

      6 reasons to buy Case 650L LT:

      Operation

      Final drive fluid volume 14.2 l. and 13 l. 8 % more or 1.2 l.
      Generator current strength 65 amperes and 55 amperes 15 % more or 10 amperes
      Cooling system fluid volume 21.4 l. and 21 l. 2 % more or 0.4 l.
      Hydraulic system fluid volume 62.5 l. and 51 l. 18 % more or 11.5 l.

      Motor

      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Carrier

      Specific ground pressure 42.7 kPa and 45 kPa 5 % less or 2.3 kPa

      Neutral reasons:

      Standard blade

      Blade angle in both directions 25 degrees and 25 degrees
      Width 3048 mm and 2438 mm
      Height 998 mm and 841 mm

      Sizes

      Width between caterpillar tracks 2338 mm and 1828 mm
      Height to cab upper part 2985 mm and 2639 mm
      Caterpillar track length on ground level 2600 mm and 2120 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 12152 kg and 7370.9 kg

      Motor

      Model PowerTech 6068T and 445TA/EHA
      Manufacturer John Deere and Case

      Hydraulic system

      Overflow valve pressure 22064 kPa and 20856.6 kPa

      Gear box

      Transmission type Electronically controlled hydrostatic drive with a split power flow and Hydro-Static Transmission
      Maximum forward speed 8.9 km/h and 8.9 km/h
      Maximum reverse gear 8.9 km/h and 8.9 km/h

      Images

      Sizes

      2. Width between caterpillar tracks 2338 mm 2. Width between caterpillar tracks 1828 mm
      3. Height to cab upper part 2985 mm 3. Height to cab upper part 2639 mm
      4. Caterpillar track length on ground level 2600 mm 4. Caterpillar track length on ground level 2120 mm
      5. Clearance 381 mm 5. Clearance 366 mm