vs.

      John Deere 750J LGP vs. Dressta TD7M LT

      17 reasons to buy John Deere 750J LGP:

      Standard blade

      Volume 3.8 m3 and 1.4 m3 63 % more or 2.4 m3
      Cut depth 650 mm and 279 mm 57 % more or 371 mm

      Sizes

      Clearance 356.9 mm and 323 mm 9 % more or 33.9 mm

      Operation

      Hydraulic system fluid volume 105.6 l. and 70 l. 34 % more or 35.6 l.
      Power unit fluid volume 105.6 l. and 70 l. 34 % more or 35.6 l.
      Fuel Capacity 371 l. and 170 l. 54 % more or 201 l.

      Motor

      Displacement 6.8 l. and 4.5 l. 34 % more or 2.3 l.
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev
      Cylinders number 6 and 4 33 % more or 2
      Full power 125.3 kW and 60 kW 52 % more or 65.3 kW
      Effective power 116 kW and 55 kW 53 % more or 61 kW

      Hydraulic system

      Pump bandwidth 144 l/min and 75.2 l/min 48 % more or 68.8 l/min

      Gear box

      Maximum forward speed 10.1 km/h and 9.2 km/h 9 % more or 0.9 km/h

      Carrier

      Specific ground pressure 30.7 kPa and 47 kPa 35 % less or 16.3 kPa
      Contact with ground area 5.3 m2 and 1.6 m2 70 % more or 3.7 m2
      Track shoes number per side 45 and 37 18 % more or 8
      Rolling bearings number on either side 8 and 6 25 % more or 2

      4 reasons to buy Dressta TD7M LT:

      Standard blade

      Blade angle in both directions 25 degrees and 23.5 degrees 6 % more or 1.5 degrees

      Operation

      Cooling system fluid volume 24.9 l. and 21.6 l. 13 % more or 3.3 l.

      Motor

      Power measured at 2500 rev / min and 2100 rev / min 16 % more or 400 rev

      Gear box

      Maximum reverse gear 10.8 km/h and 10.1 km/h 6 % more or 0.7 km/h

      Neutral reasons:

      Standard blade

      Width 3962 mm and 2620 mm
      Height 1170 mm and 840 mm

      Sizes

      Length with blade 5300 mm and 4780 mm
      Height to cab upper part 3095 mm and 2660 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 16655 kg and 7697 kg

      Motor

      Manufacturer John Deere and Cummins
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and 4-stroke diesel engine, natural aspiration, direct run, direct injection
      Model 6068H and B4.5

      Hydraulic system

      Overflow valve pressure 24993.5 kPa and 15512 kPa
      Type of pump piston pump and Pump with double gear

      Gear box

      Transmission type Hydro-Static Transmission and Powershift of modular camshaft, of electrohydraulic action

      Carrier

      Standard shoe size 864 mm and 381 mm
      Caterpillar track pitch 190 mm and 165 mm

      Images

      Sizes

      1. Length with blade 5300 mm 1. Length with blade 4780 mm
      3. Height to cab upper part 3095 mm 3. Height to cab upper part 2660 mm
      5. Clearance 356.9 mm 5. Clearance 323 mm

      Carrier

      8. Standard shoe size 864 mm 8. Standard shoe size 381 mm