- Home/
- Comparison/
- Tracked Tractor/
- John Deere 850C LGP vs. Case 550H WT
John Deere 850C LGP vs. Case 550H WT
18 reasons to buy John Deere 850C LGP:
Standard blade
Volume | 5.5 m3 and 1.5 m3 | 73 % more or 4.0 m3 |
Sizes
Clearance | 483 mm and 353 mm | 27 % more or 130 mm |
Operation
Hydraulic system fluid volume | 80 l. and 39 l. | 51 % more or 41 l. |
Final drive fluid volume | 12.3 l. and 5.7 l. | 54 % more or 6.6 l. |
Fuel Capacity | 348 l. and 115.5 l. | 67 % more or 232.5 l. |
Cooling system fluid volume | 34 l. and 15.6 l. | 54 % more or 18.4 l. |
Engine oil volume | 32.2 l. and 9.5 l. | 70 % more or 22.7 l. |
Motor
Cylinders number | 6 and 4 | 33 % more or 2 |
Full power | 143.2 kW and 56 kW | 61 % more or 87.2 kW |
Effective power | 138 kW and 50 kW | 64 % more or 88 kW |
Maximum torque | 814.8 Nm and 245.4 Nm | 70 % more or 569.4 Nm |
Displacement | 8.1 l. and 3.9 l. | 52 % more or 4.2 l. |
Hydraulic system
Pump bandwidth | 166 l/min and 82.9 l/min | 50 % more or 83.1 l/min |
Gear box
Maximum forward speed | 11 km/h and 9.3 km/h | 15 % more or 1.7 km/h |
Maximum reverse gear | 11 km/h and 10.3 km/h | 6 % more or 0.7 km/h |
Carrier
Contact with ground area | 5.9 m2 and 2 m2 | 66 % more or 3.9 m2 |
Track shoes number per side | 43 and 37 | 14 % more or 6 |
Rolling bearings number on either side | 7 and 6 | 14 % more or 1 |
4 reasons to buy Case 550H WT:
Standard blade
Cut depth | 495 mm and 429 mm | 13 % more or 66 mm |
Operation
Generator current strength | 65 amperes and 45 amperes | 31 % more or 20 amperes |
Motor
Torque measured at | 1600 rev / min and 1300 rev / min | 19 % more or 300 rev |
Power measured at | 2200 rev / min and 1800 rev / min | 18 % more or 400 rev |
Neutral reasons:
Standard blade
Width | 3978 mm and 2790 mm |
Height | 1113 mm and 838 mm |
Blade angle in both directions | 25 degrees and 25 degrees |
Sizes
Width between caterpillar tracks | 3978 mm and 2130 mm |
Height to cab upper part | 3151 mm and 2580 mm |
Caterpillar track length on ground level | 3073 mm and 1980 mm |
Operation
Operating voltage | 24 V and 12 V |
Working weight | 19113 kg and 6622 kg |
Motor
Aspiration | Turbocharging with atmospheric pressure compensation, with the charge air cooling and natural aspiration |
Manufacturer | John Deere and Case |
Model | 6081A and 4-390 |
Hydraulic system
Overflow valve pressure | 15514 kPa and 17236.9 kPa |
Gear box
Transmission type | Automatic, hydrostatic drive with a split power flow and Case modulated transmission with full mesh |
Carrier
Specific ground pressure | 31.7 kPa and 31.7 kPa |
Standard shoe size | 965.2 mm and 508 mm |
Caterpillar track pitch | 203 mm and 160 mm |
Images
Sizes
2. Width between caterpillar tracks | 3978 mm | 2. Width between caterpillar tracks | 2130 mm |
3. Height to cab upper part | 3151 mm | 3. Height to cab upper part | 2580 mm |
4. Caterpillar track length on ground level | 3073 mm | 4. Caterpillar track length on ground level | 1980 mm |
5. Clearance | 483 mm | 5. Clearance | 353 mm |
Carrier
8. Standard shoe size | 965.2 mm | 8. Standard shoe size | 508 mm |