vs.

      John Deere 850J vs. New Holland 255

      6 reasons to buy John Deere 850J:

      Standard blade

      Cut depth 600 mm and 530 mm 12 % more or 70 mm

      Operation

      Engine oil volume 26.5 l. and 22 l. 17 % more or 4.5 l.
      Hydraulic system fluid volume 105.6 l. and 105 l. 1 % more or 0.6 l.
      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes

      Motor

      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev
      Displacement 9 l. and 8.3 l. 8 % more or 0.7 l.

      13 reasons to buy New Holland 255:

      Standard blade

      Volume 7 m3 and 5.6 m3 20 % more or 1.4 m3

      Sizes

      Clearance 460 mm and 408.5 mm 11 % more or 51.5 mm

      Operation

      Fuel Capacity 500 l. and 371 l. 26 % more or 129 l.
      Cooling system fluid volume 65 l. and 34.5 l. 47 % more or 30.5 l.
      Final drive fluid volume 46 l. and 16.3 l. 65 % more or 29.7 l.

      Motor

      Effective power 179 kW and 138 kW 23 % more or 41 kW
      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev
      Maximum torque 1127.8 Nm and 828.4 Nm 27 % more or 299.4 Nm

      Hydraulic system

      Pump bandwidth 212 l/min and 174 l/min 18 % more or 38 l/min

      Gear box

      Maximum forward speed 10.9 km/h and 10.1 km/h 7 % more or 0.8 km/h
      Maximum reverse gear 12.6 km/h and 10.1 km/h 20 % more or 2.5 km/h

      Carrier

      Contact with ground area 32.7 m2 and 3.4 m2 90 % more or 29.3 m2
      Track shoes number per side 41 and 40 2 % more or 1

      Neutral reasons:

      Standard blade

      Width 3251 mm and 3800 mm
      Height 1422 mm and 1500 mm

      Sizes

      Caterpillar track length on ground level 2770 mm and 2973 mm
      Width between caterpillar tracks 2489.2 mm and 2940 mm
      Height to cab upper part 3180 mm and 3420 mm
      Length with blade 5377 mm and 5855 mm

      Operation

      Working weight 18079 kg and 26600 kg
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer John Deere and Cummins
      Model 6090HT and 6C6TAA 8.3

      Hydraulic system

      Type of pump piston pump and gear type pump
      Overflow valve pressure 24993.5 kPa and 19000 kPa

      Gear box

      Transmission type Hydro-Static Transmission and Powershift, camshaft, full mesh

      Carrier

      Standard shoe size 610 mm and 550 mm
      Rolling bearings number on either side 7 and 7
      Track width 1880 mm and 2070 mm

      Images

      Sizes

      1. Length with blade 5377 mm 1. Length with blade 5855 mm
      2. Width between caterpillar tracks 2489.2 mm 2. Width between caterpillar tracks 2940 mm
      3. Height to cab upper part 3180 mm 3. Height to cab upper part 3420 mm
      4. Caterpillar track length on ground level 2770 mm 4. Caterpillar track length on ground level 2973 mm
      5. Clearance 408.5 mm 5. Clearance 460 mm

      Carrier

      8. Standard shoe size 610 mm 8. Standard shoe size 550 mm
      7. Track width 1880 mm 7. Track width 2070 mm