vs.

      Komatsu D51EX-22 vs. John Deere 750C LT

      8 reasons to buy Komatsu D51EX-22:

      Standard blade

      Blade angle in both directions 28.5 degrees and 24 degrees 16 % more or 4.5 degrees

      Sizes

      Clearance 390 mm and 371 mm 5 % more or 19 mm

      Operation

      Cooling system fluid volume 35 l. and 26.5 l. 24 % more or 8.5 l.
      Generator current strength 60 amperes and 45 amperes 25 % more or 15 amperes
      Engine oil volume 20 l. and 19 l. 5 % more or 1 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Carrier

      Specific ground pressure 44.2 kPa and 51.7 kPa 15 % less or 7.5 kPa
      Track shoes number per side 44 and 40 9 % more or 4

      12 reasons to buy John Deere 750C LT:

      Standard blade

      Volume 3.5 m3 and 2.7 m3 23 % more or 0.8 m3
      Cut depth 848.4 mm and 456 mm 46 % more or 392.4 mm

      Operation

      Fuel Capacity 280 l. and 270 l. 4 % more or 10 l.
      Hydraulic system fluid volume 68 l. and 63 l. 7 % more or 5 l.
      Final drive fluid volume 23.6 l. and 4 l. 83 % more or 19.6 l.

      Motor

      Full power 110.4 kW and 99 kW 10 % more or 11.4 kW
      Effective power 104.4 kW and 97 kW 7 % more or 7.4 kW
      Displacement 6.8 l. and 6.7 l. 1 % more or 0.1 l.

      Hydraulic system

      Pump bandwidth 144 l/min and 99 l/min 31 % more or 45 l/min

      Gear box

      Maximum forward speed 11 km/h and 9 km/h 18 % more or 2 km/h
      Maximum reverse gear 11 km/h and 9 km/h 18 % more or 2 km/h

      Carrier

      Contact with ground area 2.9 m2 and 2.8 m2 3 % more or 0.1 m2

      Neutral reasons:

      Standard blade

      Height 1110 mm and 1193 mm
      Width 3045 mm and 3283 mm

      Sizes

      Length with blade 4800 mm and 4955 mm
      Width between caterpillar tracks 2300 mm and 2438 mm
      Height to cab upper part 3002 mm and 3065 mm
      Caterpillar track length on ground level 2736 mm and 2591 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 12600 kg and 15335 kg

      Motor

      Model SAA6D107E-1 and 6068T
      Manufacturer Komatsu and John Deere
      Cylinders number 6 and 6
      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging

      Hydraulic system

      Type of pump piston-type hydraulic pump and gear type pump
      Overflow valve pressure 27461.8 kPa and 13790 kPa

      Gear box

      Transmission type dual path hydrostatic transmission and Hydrostatic drive pumps

      Carrier

      Rolling bearings number on either side 7 and 7
      Track width 1790 mm and 1880 mm
      Standard shoe size 510 mm and 560 mm

      Images

      Sizes

      3. Height to cab upper part 3002 mm 3. Height to cab upper part 3065 mm
      4. Caterpillar track length on ground level 2736 mm 4. Caterpillar track length on ground level 2591 mm
      5. Clearance 390 mm 5. Clearance 371 mm
      1. Length with blade 4800 mm 1. Length with blade 4955 mm
      2. Width between caterpillar tracks 2300 mm 2. Width between caterpillar tracks 2438 mm

      Carrier

      7. Track width 1790 mm 7. Track width 1880 mm
      8. Standard shoe size 510 mm 8. Standard shoe size 560 mm