- Home/
- Comparison/
- Tracked Tractor/
- Liebherr LR632B L vs. John Deere 950C LT
Liebherr LR632B L vs. John Deere 950C LT
7 reasons to buy Liebherr LR632B L:
Standard blade
Cut depth | 536 mm and 525 mm | 2 % more or 11 mm |
Sizes
Clearance | 494 mm and 482 mm | 2 % more or 12 mm |
Operation
Engine oil volume | 43 l. and 25.5 l. | 41 % more or 17.5 l. |
Final drive fluid volume | 16 l. and 14.5 l. | 9 % more or 1.5 l. |
Generator current strength | 80 amperes and 55 amperes | 31 % more or 25 amperes |
Motor
Displacement | 10.5 l. and 10 l. | 5 % more or 0.5 l. |
Carrier
Specific ground pressure | 69.6 kPa and 71 kPa | 2 % less or 1.4 kPa |
7 reasons to buy John Deere 950C LT:
Standard blade
Volume | 7.2 m3 and 5.6 m3 | 22 % more or 1.6 m3 |
Blade angle in both directions | 25 degrees and 10 degrees | 60 % more or 15 degrees |
Operation
Hydraulic system fluid volume | 178 l. and 162 l. | 9 % more or 16 l. |
Fuel Capacity | 450 l. and 400 l. | 11 % more or 50 l. |
Cooling system fluid volume | 64.4 l. and 62 l. | 4 % more or 2.4 l. |
Hydraulic system
Pump bandwidth | 292 l/min and 209 l/min | 28 % more or 83 l/min |
Carrier
Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
Neutral reasons:
Standard blade
Width | 3372 mm and 3965 mm |
Height | 1400 mm and 1450 mm |
Sizes
Length without blade | 4335 mm and 4300 mm |
Width between caterpillar tracks | 2381 mm and 2974 mm |
Height to cab upper part | 3258 mm and 3305 mm |
Caterpillar track length on ground level | 2830 mm and 3275 mm |
Operation
Working weight | 20398 kg and 23700 kg |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Liebherr and Liebherr |
Model | D 936 L A6 and D 926 TI |
Power measured at | 1800 rev / min and 1800 rev / min |
Aspiration | turbocharging and Turbocharging with intercooler |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | variable displacement piston pump of axial cam type and Variable displacement piston pump with load sensing proportional pump flow control |
Overflow valve pressure | 19994.8 kPa and 16000 kPa |
Gear box
Transmission type | Hydrostatic travel drive with infinitely variable control, independent drive for each caterpillar body and Electronically controlled closed loop hydrostatic drive with a split power flow |
Forward gears number | 3 and 3 |
Reverse gears number | 3 and 3 |
Maximum forward speed | 11 km/h and 11 km/h |
Maximum reverse gear | 11 km/h and 11 km/h |
Images
Sizes
2. Width between caterpillar tracks | 2381 mm | 2. Width between caterpillar tracks | 2974 mm |
3. Height to cab upper part | 3258 mm | 3. Height to cab upper part | 3305 mm |
4. Caterpillar track length on ground level | 2830 mm | 4. Caterpillar track length on ground level | 3275 mm |
5. Clearance | 494 mm | 5. Clearance | 482 mm |
6. Length without blade | 4335 mm | 6. Length without blade | 4300 mm |