vs.

      New Holland D150 LGP vs. John Deere 450H

      19 reasons to buy New Holland D150 LGP:

      Standard blade

      Volume 3.2 m3 and 1.4 m3 56 % more or 1.8 m3
      Cut depth 590 mm and 528 mm 11 % more or 62 mm

      Sizes

      Clearance 370 mm and 346 mm 6 % more or 24 mm

      Operation

      Engine oil volume 14.2 l. and 14 l. 1 % more or 0.2 l.
      Hydraulic system fluid volume 63 l. and 32.2 l. 49 % more or 30.8 l.
      Fuel Capacity 270 l. and 136 l. 50 % more or 134 l.
      Final drive fluid volume 26 l. and 6.6 l. 75 % more or 19.4 l.
      Cooling system fluid volume 25 l. and 16 l. 36 % more or 9 l.
      Generator current strength 70 amperes and 65 amperes 7 % more or 5 amperes

      Motor

      Effective power 104.4 kW and 52.2 kW 50 % more or 52.2 kW
      Maximum torque 650 Nm and 302.3 Nm 53 % more or 347.7 Nm
      Displacement 5.9 l. and 4.5 l. 24 % more or 1.4 l.
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Maximum forward speed 11 km/h and 8 km/h 27 % more or 3 km/h
      Maximum reverse gear 13 km/h and 8 km/h 38 % more or 5 km/h

      Carrier

      Rolling bearings number on either side 8 and 5 37 % more or 3
      Specific ground pressure 34.3 kPa and 42.1 kPa 19 % less or 7.8 kPa
      Track shoes number per side 48 and 37 23 % more or 11

      2 reasons to buy John Deere 450H:

      Standard blade

      Blade angle in both directions 25.4 degrees and 5 degrees 80 % more or 20.4 degrees

      Carrier

      Contact with ground area 15897 m2 and 47.8 m2 100 % more or 15849.2 m2

      Neutral reasons:

      Standard blade

      Width 4000 mm and 2286 mm
      Height 1000 mm and 826 mm

      Sizes

      Length without blade 4010 mm and 3937 mm
      Width between caterpillar tracks 2940 mm and 406 mm
      Height to cab upper part 3080 mm and 2590 mm
      Caterpillar track length on ground level 2985 mm and 1956 mm

      Operation

      Working weight 16610 kg and 6818 kg
      Operating voltage 24 V and 12 V

      Motor

      Model 6BTAA5.9 and 4045D
      Manufacturer Cummins and John Deere
      Power measured at 2200 rev / min and 2200 rev / min
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and natural aspiration

      Hydraulic system

      Type of pump variable displacement piston pump and gear type pump
      Overflow valve pressure 19000 kPa and 20685 kPa

      Gear box

      Transmission type Powershift, camshaft, full mesh and Electronically controlled hydrostatic drive with a split power flow

      Carrier

      Standard shoe size 800 mm and 406 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2940 mm 2. Width between caterpillar tracks 406 mm
      3. Height to cab upper part 3080 mm 3. Height to cab upper part 2590 mm
      4. Caterpillar track length on ground level 2985 mm 4. Caterpillar track length on ground level 1956 mm
      5. Clearance 370 mm 5. Clearance 346 mm
      6. Length without blade 4010 mm 6. Length without blade 3937 mm

      Carrier

      8. Standard shoe size 800 mm 8. Standard shoe size 406 mm