vs.

      New Holland D150 XLT vs. Case 750L LT

      17 reasons to buy New Holland D150 XLT:

      Standard blade

      Volume 3.2 m3 and 1.7 m3 47 % more or 1.5 m3
      Cut depth 490 mm and 483 mm 1 % more or 7 mm

      Operation

      Engine oil volume 14.2 l. and 11.5 l. 19 % more or 2.7 l.
      Final drive fluid volume 26 l. and 14.2 l. 45 % more or 11.8 l.
      Fuel Capacity 270 l. and 189.3 l. 30 % more or 80.7 l.
      Cooling system fluid volume 25 l. and 22.5 l. 10 % more or 2.5 l.

      Motor

      Cylinders number 6 and 4 33 % more or 2
      Effective power 104.4 kW and 62.6 kW 40 % more or 41.8 kW
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Maximum torque 650 Nm and 390.5 Nm 40 % more or 259.5 Nm
      Displacement 5.9 l. and 4.5 l. 24 % more or 1.4 l.

      Gear box

      Maximum forward speed 11 km/h and 9.7 km/h 12 % more or 1.3 km/h
      Maximum reverse gear 13 km/h and 9.7 km/h 25 % more or 3.3 km/h

      Carrier

      Contact with ground area 29.9 m2 and 2.1 m2 93 % more or 27.8 m2
      Track shoes number per side 48 and 39 19 % more or 9
      Rolling bearings number on either side 8 and 6 25 % more or 2
      Support rollers number on either side 2 and 1 50 % more or 1

      8 reasons to buy Case 750L LT:

      Standard blade

      Blade angle in both directions 25 degrees and 5 degrees 80 % more or 20 degrees

      Sizes

      Clearance 379 mm and 370 mm 2 % more or 9 mm

      Operation

      Hydraulic system fluid volume 75.7 l. and 63 l. 17 % more or 12.7 l.
      Generator current strength 90 amperes and 70 amperes 22 % more or 20 amperes

      Motor

      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Reverse gears number 4 and 3 25 % more or 1

      Carrier

      Specific ground pressure 36.5 kPa and 51 kPa 28 % less or 14.5 kPa

      Neutral reasons:

      Standard blade

      Width 3200 mm and 2642 mm
      Height 1100 mm and 914 mm

      Sizes

      Width between caterpillar tracks 2400 mm and 2032 mm
      Height to cab upper part 3080 mm and 2773 mm
      Caterpillar track length on ground level 2985 mm and 2260 mm
      Length with blade 5315 mm and 4322 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 15680 kg and 8569 kg

      Motor

      Manufacturer Cummins and Case
      Model 6BTAA5.9 and Family IV, 445TA/E66 3 level

      Hydraulic system

      Overflow valve pressure 19000 kPa and 20684.3 kPa

      Gear box

      Transmission type Powershift, camshaft, full mesh and hydrostatic

      Carrier

      Track width 1900 mm and 1570 mm
      Standard shoe size 500 mm and 457 mm

      Images

      Sizes

      1. Length with blade 5315 mm 1. Length with blade 4322 mm
      2. Width between caterpillar tracks 2400 mm 2. Width between caterpillar tracks 2032 mm
      3. Height to cab upper part 3080 mm 3. Height to cab upper part 2773 mm
      4. Caterpillar track length on ground level 2985 mm 4. Caterpillar track length on ground level 2260 mm
      5. Clearance 370 mm 5. Clearance 379 mm

      Carrier

      7. Track width 1900 mm 7. Track width 1570 mm
      8. Standard shoe size 500 mm 8. Standard shoe size 457 mm