- Home/
- Comparison/
- Tracked Tractor/
- New Holland D180 LGP vs. Komatsu D32P-1
New Holland D180 LGP vs. Komatsu D32P-1
18 reasons to buy New Holland D180 LGP:
Standard blade
Volume | 3.7 m3 and 1.5 m3 | 59 % more or 2.2 m3 |
Cut depth | 535 mm and 439.4 mm | 18 % more or 95.6 mm |
Sizes
Clearance | 390 mm and 323 mm | 17 % more or 67 mm |
Operation
Final drive fluid volume | 18 l. and 9.5 l. | 47 % more or 8.5 l. |
Generator current strength | 70 amperes and 62 amperes | 11 % more or 8 amperes |
Fuel Capacity | 400 l. and 170.3 l. | 57 % more or 229.7 l. |
Cooling system fluid volume | 30 l. and 26.5 l. | 12 % more or 3.5 l. |
Engine oil volume | 19 l. and 10.4 l. | 45 % more or 8.6 l. |
Motor
Cylinders number | 6 and 4 | 33 % more or 2 |
Effective power | 134.2 kW and 52.2 kW | 61 % more or 82.0 kW |
Displacement | 8.3 l. and 3.9 l. | 53 % more or 4.4 l. |
Hydraulic system
Pump bandwidth | 165 l/min and 75.7 l/min | 54 % more or 89.3 l/min |
Gear box
Maximum forward speed | 10.6 km/h and 8.9 km/h | 16 % more or 1.7 km/h |
Maximum reverse gear | 12.7 km/h and 10.5 km/h | 17 % more or 2.2 km/h |
Carrier
Contact with ground area | 58.7 m2 and 2.5 m2 | 96 % more or 56.2 m2 |
Track shoes number per side | 45 and 37 | 18 % more or 8 |
Rolling bearings number on either side | 8 and 6 | 25 % more or 2 |
Support rollers number on either side | 2 and 1 | 50 % more or 1 |
3 reasons to buy Komatsu D32P-1:
Standard blade
Blade angle in both directions | 25 degrees and 10 degrees | 60 % more or 15 degrees |
Motor
Power measured at | 2500 rev / min and 2000 rev / min | 20 % more or 500 rev |
Carrier
Specific ground pressure | 30.3 kPa and 37.3 kPa | 19 % less or 7.0 kPa |
Neutral reasons:
Standard blade
Width | 3900 mm and 2820 mm |
Sizes
Height to cab upper part | 3235 mm and 2590 mm |
Caterpillar track length on ground level | 3205 mm and 2090 mm |
Length with blade | 5675 mm and 4310 mm |
Operation
Operating voltage | 24 V and 12 V |
Working weight | 22330 kg and 7860.8 kg |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and natural aspiration |
Manufacturer | Cummins and Komatsu |
Model | 6CTA8.3 and 4D102E-1 |
Hydraulic system
Type of pump | variable displacement piston pump and gear type pump with a double section |
Overflow valve pressure | 19000 kPa and 15513.2 kPa |
Gear box
Transmission type | Powershift, camshaft, full mesh and hydraulic gear reducer |
Forward gears number | 3 and 3 |
Reverse gears number | 3 and 3 |
Carrier
Standard shoe size | 915 mm and 609.6 mm |
Track width | 2085 mm and 1550 mm |
Images
Sizes
1. Length with blade | 5675 mm | 1. Length with blade | 4310 mm |
3. Height to cab upper part | 3235 mm | 3. Height to cab upper part | 2590 mm |
4. Caterpillar track length on ground level | 3205 mm | 4. Caterpillar track length on ground level | 2090 mm |
5. Clearance | 390 mm | 5. Clearance | 323 mm |
Carrier
7. Track width | 2085 mm | 7. Track width | 1550 mm |
8. Standard shoe size | 915 mm | 8. Standard shoe size | 609.6 mm |