vs.

      New Holland D180 XLT vs. Dressta TD10M LGP

      17 reasons to buy New Holland D180 XLT:

      Standard blade

      Volume 5.6 m3 and 2 m3 64 % more or 3.6 m3
      Cut depth 550 mm and 305 mm 45 % more or 245 mm

      Sizes

      Clearance 390 mm and 381 mm 2 % more or 9 mm

      Operation

      Fuel Capacity 400 l. and 170 l. 57 % more or 230 l.
      Cooling system fluid volume 30 l. and 24.9 l. 17 % more or 5.1 l.
      Engine oil volume 19 l. and 10.4 l. 45 % more or 8.6 l.
      Hydraulic system fluid volume 110 l. and 70 l. 36 % more or 40 l.
      Final drive fluid volume 18 l. and 15.1 l. 16 % more or 2.9 l.

      Motor

      Cylinders number 6 and 4 33 % more or 2
      Effective power 134.2 kW and 76 kW 43 % more or 58.2 kW
      Displacement 8.3 l. and 4.5 l. 46 % more or 3.8 l.

      Hydraulic system

      Pump bandwidth 165 l/min and 75.2 l/min 54 % more or 89.8 l/min

      Gear box

      Maximum forward speed 10.6 km/h and 10 km/h 6 % more or 0.6 km/h
      Maximum reverse gear 12.7 km/h and 11.9 km/h 6 % more or 0.8 km/h

      Carrier

      Track shoes number per side 45 and 39 13 % more or 6
      Contact with ground area 35.9 m2 and 2.7 m2 92 % more or 33.2 m2
      Rolling bearings number on either side 8 and 6 25 % more or 2

      3 reasons to buy Dressta TD10M LGP:

      Standard blade

      Blade angle in both directions 25 degrees and 10 degrees 60 % more or 15 degrees

      Motor

      Power measured at 2500 rev / min and 2000 rev / min 20 % more or 500 rev

      Carrier

      Specific ground pressure 32.4 kPa and 56.8 kPa 43 % less or 24.4 kPa

      Neutral reasons:

      Standard blade

      Width 3420 mm and 2820 mm
      Height 1425 mm and 990 mm

      Sizes

      Width between caterpillar tracks 2460 mm and 2570 mm
      Height to cab upper part 3235 mm and 2720 mm
      Length without blade 4210 mm and 4800 mm

      Operation

      Working weight 20800 kg and 8910 kg
      Operating voltage 24 V and 12 V

      Motor

      Model 6CTA8.3 and QSB4.5
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and 4-stroke diesel engine turbocharging, ECM, direct run, direct injection
      Manufacturer Cummins and Cummins

      Hydraulic system

      Type of pump variable displacement piston pump and Pump with double gear
      Overflow valve pressure 19000 kPa and 15512 kPa

      Gear box

      Transmission type Powershift, camshaft, full mesh and Powershift of modular camshaft, of electrohydraulic action
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 560 mm and 610 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2460 mm 2. Width between caterpillar tracks 2570 mm
      3. Height to cab upper part 3235 mm 3. Height to cab upper part 2720 mm
      5. Clearance 390 mm 5. Clearance 381 mm
      6. Length without blade 4210 mm 6. Length without blade 4800 mm

      Carrier

      8. Standard shoe size 560 mm 8. Standard shoe size 610 mm