- Home/
- Comparison/
- Tracked Tractor/
- New Holland D180 XLT vs. Liebherr LR632B L
New Holland D180 XLT vs. Liebherr LR632B L
6 reasons to buy New Holland D180 XLT:
Standard blade
Cut depth | 550 mm and 536 mm | 3 % more or 14 mm |
Operation
Final drive fluid volume | 18 l. and 16 l. | 11 % more or 2 l. |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Gear box
Maximum reverse gear | 12.7 km/h and 11 km/h | 13 % more or 1.7 km/h |
Carrier
Specific ground pressure | 56.8 kPa and 69.6 kPa | 18 % less or 12.8 kPa |
Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
8 reasons to buy Liebherr LR632B L:
Sizes
Clearance | 494 mm and 390 mm | 21 % more or 104 mm |
Operation
Hydraulic system fluid volume | 162 l. and 110 l. | 32 % more or 52 l. |
Cooling system fluid volume | 62 l. and 30 l. | 52 % more or 32 l. |
Engine oil volume | 43 l. and 19 l. | 56 % more or 24 l. |
Generator current strength | 80 amperes and 70 amperes | 12 % more or 10 amperes |
Motor
Displacement | 10.5 l. and 8.3 l. | 21 % more or 2.2 l. |
Hydraulic system
Pump bandwidth | 209 l/min and 165 l/min | 21 % more or 44 l/min |
Gear box
Maximum forward speed | 11 km/h and 10.6 km/h | 4 % more or 0.4 km/h |
Neutral reasons:
Standard blade
Width | 3420 mm and 3372 mm |
Height | 1425 mm and 1400 mm |
Volume | 5.6 m3 and 5.6 m3 |
Blade angle in both directions | 10 degrees and 10 degrees |
Sizes
Length without blade | 4210 mm and 4335 mm |
Width between caterpillar tracks | 2460 mm and 2381 mm |
Height to cab upper part | 3235 mm and 3258 mm |
Caterpillar track length on ground level | 3205 mm and 2830 mm |
Operation
Fuel Capacity | 400 l. and 400 l. |
Operating voltage | 24 V and 24 V |
Working weight | 20800 kg and 20398 kg |
Motor
Manufacturer | Cummins and Liebherr |
Model | 6CTA8.3 and D 936 L A6 |
Cylinders number | 6 and 6 |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging |
Hydraulic system
Overflow valve pressure | 19000 kPa and 19994.8 kPa |
Type of pump | variable displacement piston pump and variable displacement piston pump of axial cam type |
Gear box
Transmission type | Powershift, camshaft, full mesh and Hydrostatic travel drive with infinitely variable control, independent drive for each caterpillar body |
Forward gears number | 3 and 3 |
Reverse gears number | 3 and 3 |
Carrier
Standard shoe size | 560 mm and 508 mm |
Images
Sizes
2. Width between caterpillar tracks | 2460 mm | 2. Width between caterpillar tracks | 2381 mm |
3. Height to cab upper part | 3235 mm | 3. Height to cab upper part | 3258 mm |
4. Caterpillar track length on ground level | 3205 mm | 4. Caterpillar track length on ground level | 2830 mm |
5. Clearance | 390 mm | 5. Clearance | 494 mm |
6. Length without blade | 4210 mm | 6. Length without blade | 4335 mm |
Carrier
8. Standard shoe size | 560 mm | 8. Standard shoe size | 508 mm |