vs.

      New Holland D95 WT vs. John Deere 750C LGP

      5 reasons to buy New Holland D95 WT:

      Standard blade

      Blade angle in both directions 25 degrees and 24 degrees 4 % more or 1 degrees

      Sizes

      Clearance 379 mm and 371 mm 2 % more or 8 mm

      Operation

      Hydraulic system fluid volume 75.7 l. and 68 l. 10 % more or 7.7 l.
      Generator current strength 65 amperes and 45 amperes 31 % more or 20 amperes

      Carrier

      Specific ground pressure 31.3 kPa and 33.9 kPa 8 % less or 2.6 kPa

      15 reasons to buy John Deere 750C LGP:

      Standard blade

      Cut depth 848 mm and 483 mm 43 % more or 365 mm
      Volume 3.7 m3 and 1.9 m3 49 % more or 1.8 m3

      Operation

      Fuel Capacity 280 l. and 189.3 l. 32 % more or 90.7 l.
      Cooling system fluid volume 26.5 l. and 18.9 l. 29 % more or 7.6 l.
      Engine oil volume 19 l. and 15.8 l. 17 % more or 3.2 l.
      Final drive fluid volume 27.8 l. and 14.2 l. 49 % more or 13.6 l.

      Motor

      Effective power 104.4 kW and 71.6 kW 31 % more or 32.8 kW
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Maximum torque 569.4 Nm and 441 Nm 23 % more or 128.4 Nm
      Displacement 6.8 l. and 6.7 l. 1 % more or 0.1 l.
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev
      Full power 110.4 kW and 73.8 kW 33 % more or 36.6 kW

      Hydraulic system

      Pump bandwidth 144 l/min and 76.8 l/min 47 % more or 67.2 l/min

      Gear box

      Maximum forward speed 11 km/h and 9.7 km/h 12 % more or 1.3 km/h

      Carrier

      Track shoes number per side 42 and 40 5 % more or 2

      Neutral reasons:

      Standard blade

      Width 3050 mm and 3861 mm
      Height 910 mm and 1143 mm

      Sizes

      Length with blade 4258 mm and 4916 mm
      Width between caterpillar tracks 2820 mm and 2946 mm
      Height to cab upper part 2773 mm and 3065 mm
      Caterpillar track length on ground level 2360 mm and 2781 mm

      Operation

      Operating voltage 12 V and 24 V
      Working weight 9163 kg and 16625 kg

      Motor

      Manufacturer New Holland and John Deere
      Cylinders number 6 and 6
      Model 667T/M2 and 6068T
      Aspiration natural aspiration and turbocharging

      Hydraulic system

      Type of pump gear type pump and gear type pump

      Gear box

      Transmission type Hydro-Static Transmission and Hydrostatic drive pumps

      Carrier

      Track width 1780 mm and 2083 mm
      Standard shoe size 610 mm and 865 mm
      Rolling bearings number on either side 7 and 7
      Caterpillar track pitch 171 mm and 190 mm

      Images

      Sizes

      5. Clearance 379 mm 5. Clearance 371 mm
      1. Length with blade 4258 mm 1. Length with blade 4916 mm
      2. Width between caterpillar tracks 2820 mm 2. Width between caterpillar tracks 2946 mm
      3. Height to cab upper part 2773 mm 3. Height to cab upper part 3065 mm
      4. Caterpillar track length on ground level 2360 mm 4. Caterpillar track length on ground level 2781 mm

      Carrier

      7. Track width 1780 mm 7. Track width 2083 mm
      8. Standard shoe size 610 mm 8. Standard shoe size 865 mm