vs.

      New Holland D95B WT vs. John Deere 1050C WH

      5 reasons to buy New Holland D95B WT:

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev
      Torque measured at 1400 rev / min and 1200 rev / min 14 % more or 200 rev

      Gear box

      Forward gears number 10 and 3 70 % more or 7
      Reverse gears number 10 and 3 70 % more or 7

      Carrier

      Specific ground pressure 31.3 kPa and 89 kPa 65 % less or 57.7 kPa

      18 reasons to buy John Deere 1050C WH:

      Standard blade

      Volume 21.2 m3 and 1.9 m3 91 % more or 19.3 m3
      Cut depth 570 mm and 483 mm 15 % more or 87 mm

      Sizes

      Clearance 625 mm and 369 mm 41 % more or 256 mm

      Operation

      Generator current strength 80 amperes and 65 amperes 19 % more or 15 amperes
      Cooling system fluid volume 68 l. and 22.5 l. 67 % more or 45.5 l.
      Engine oil volume 24 l. and 12.3 l. 49 % more or 11.7 l.
      Hydraulic system fluid volume 210 l. and 75.7 l. 64 % more or 134.3 l.
      Final drive fluid volume 21 l. and 14.2 l. 32 % more or 6.8 l.
      Fuel Capacity 610 l. and 189 l. 69 % more or 421 l.

      Motor

      Effective power 241.6 kW and 71.6 kW 70 % more or 170.0 kW
      Maximum torque 1530.7 Nm and 400 Nm 74 % more or 1130.7 Nm
      Displacement 13 l. and 4.5 l. 65 % more or 8.5 l.
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 336 l/min and 76.8 l/min 77 % more or 259.2 l/min

      Gear box

      Maximum forward speed 11 km/h and 8.9 km/h 19 % more or 2.1 km/h
      Maximum reverse gear 11 km/h and 8.9 km/h 19 % more or 2.1 km/h

      Carrier

      Track shoes number per side 44 and 40 9 % more or 4
      Rolling bearings number on either side 7 and 1 86 % more or 6

      Neutral reasons:

      Standard blade

      Blade angle in both directions 25 degrees and 25 degrees
      Width 3050 mm and 4200 mm
      Height 910 mm and 2450 mm

      Sizes

      Length without blade 3263 mm and 4885 mm
      Width between caterpillar tracks 2907 mm and 3145 mm
      Height to cab upper part 2788 mm and 3640 mm
      Caterpillar track length on ground level 2352 mm and 3174 mm

      Operation

      Operating voltage 12 V and 24 V
      Working weight 9163 kg and 35129 kg

      Motor

      Model FPT 445TA/E66 and D 9406 TI-E A3

      Hydraulic system

      Type of pump gear type pump and Variable displacement piston pump with load sensing proportional pump flow control

      Gear box

      Transmission type Hydro-Static Transmission and Electronically controlled closed loop hydrostatic drive with a split power flow

      Carrier

      Caterpillar track pitch 171 mm and 215 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2907 mm 2. Width between caterpillar tracks 3145 mm
      3. Height to cab upper part 2788 mm 3. Height to cab upper part 3640 mm
      4. Caterpillar track length on ground level 2352 mm 4. Caterpillar track length on ground level 3174 mm
      5. Clearance 369 mm 5. Clearance 625 mm
      6. Length without blade 3263 mm 6. Length without blade 4885 mm